Grinding With 1, 2, Or 3 Heads; Grinding Head Pressure; Dust Collector Speed; Direction Of The Grind Heads - Husqvarna Blastrac BMG 2200RC Operator's Manual

5.8.2

Grinding with 1, 2, or 3 heads

The 3 grinding heads can be used independently. You can
use 1, 2 or 3 grinding heads in every combination.
Raise the grinding head(s) you do not use and secure in
the UP position with the quick release pins.
Turn the particular grinding head(s) off (12, 13 and/or
14) in the SYSTEM MENU:
5.8.3

Grinding head pressure

Use the "HEAD PRESSURE" selection (10) to increase or
decrease the pressure of the grind heads on the working
surface.
-20% There is less pressure on the surface.
-10%
0 There is the normal pressure, equal to a
BMG-780.
+10% There is more pressure on the surface.
+20%
5.8.4

Dust collector speed

The suction power of the dust collector can be adjusted to the particular type of surface / grinding tools / work
speed etc. Select one of the options: "LOW" - "MEDIUM" - "HIGH" in the dust collector speed selection (8).
The Pressure Difference of the filters (7) below the speed selection is indicated in kPa or in. water colom when
metric is not selected.
5.8.5

Direction of the grind heads

The normal direction of turn the grinding heads is clockwise
(CW) and the grinder CCW selection is OFF.
It is possible to turn the grind heads counterclockwise (CCW).
Go to the SETTINGS MENU and select ON in the "Grinder CCW"
section (4).
26 21.07.2023