5.11
Longopack cassette replacement
Wear a dust mask of at least FFP3 and gloves.
1. Make sure that the compressor and dust collector are
OFF.
2. Close the butterfly valves (1).
3. Remove the Longopack holder (2).
4. Position the new Longopack bag (5) in the support.
5. Cut the clamps (6).
6. Slide out the inner end (7) of the Longopack bag.
7. Slide the outer end (8) out and pull it down over the
rim.
21.07.2023
2
9
2
8
3
1
5
7
8. Fit the Longopack holder (2)
back on the machine.
9. Pull the outer end (8) of the
Longopack further down.
10. Place the strap (9) around
the inner end of the
Longopack bag.
11. Tighten the Longopack bag
with a clamp (3).
12. Pull out the new section of
Longopack (4) about
35 cm / 13 in.
4
6
8
29