Husqvarna R 316TX Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Floor Machine
  5. R 316TX
  6. Operator's manual

Husqvarna R 316TX Operator's Manual

Hide thumbs Also See for R 316TX:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
R 316TX, R 316TX AWD, R 316TsX AWD
ES
Manual de usuario
PT
Manual do utilizador
EN
Operator's manual
IT
Manuale dell'operatore
2-39
40-77
78-112
113-149

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna R 316TX

Summary of Contents for Husqvarna R 316TX

  • Page 1 R 316TX, R 316TX AWD, R 316TsX AWD Manual de usuario 2-39 Manual do utilizador 40-77 Operator's manual 78-112 Manuale dell'operatore 113-149...

  • Page 2: Table Of Contents

    Combi cutting decks with new product. Speak to your insurance company if you BioClip. Models R 316TX AWD and R 316TsX AWD are not sure. We recommend a fully comprehensive have all wheel drive (AWD).
  • Page 3 Product overview 9 10 1. Forward pedal 12. Battery 2. Rearward pedal 13. Cover lock 3. Display 14. Fuel tank cap 4. Lift lever for the cutting deck 15. Type plate with a scannable code 5. Cutting height lever 16. Lever to engage or disengage the transmission on the front axle on AWD products.
  • Page 4 Husqvarna Connect The product has wireless technology and can connect to mobile devices that have the Husqvarna Connect app installed. The Husqvarna Connect app is a free app for 844 - 002 -...

  • Page 5: Hour Meter

    Push the switch (A) to make the high beam lights come The time with ignition on but engine off, is not registered. on or go off. The last digit shows tenth of an hour (6 minutes). Operator presence control (OPC) The OPC engages when the operator lifts from the seat.
  • Page 6 Display The display on the instrument panel shows information of the status of the product. 1. Slope indicator Note: The look of the display can be different between 2. Hydraulic temperature indicator different models. 3. Oil pressure indicator 4. Battery level indicator Symbols on the product 5.
  • Page 7 Never use the product if persons, especially children, or animals, are in the vicinity. Fuel. Look behind you before and while you move the product in reverse. Max. ethanol 10%. Never cut grass across a slope. Do not cut grass on ground that slopes more than 10°. To cut grass on slopes on page 86 .

  • Page 8: Safety

    Safety Safety definitions • Learn to recognize the safety decals. • Keep the product clean to make sure that you can Warnings, cautions and notes are used to point out clearly read signs and stickers. specially important parts of the manual. •...
  • Page 9 • Do not use the product if you are fatigued, while • Always look down and behind you before and while under the influence of alcohol or drugs, medicine or you move in reverse. Look out for large and small anything that can have a negative effect on your obstacles.
  • Page 10 WARNING: The muffler becomes very hot safety devices are defective, speak to your during and after use and when the engine Husqvarna service agent. operates at idle speed. Be careful near • Do not make modifications on safety devices. Do not...
  • Page 11 Speak to your dealer for Disposal on page • Discard replaced batteries. See more information. On R 316TX AWD, R 316TsX 108 . AWD, use counterweights since wheel weights can • Explosive gases can come from the battery. Do not not be used on AWD products.

  • Page 12: Assembly

    • The ignition cables are removed from the • Let the product become cool before you do plugs. maintenance near the engine. • The blades are sharp and can cause cuts. Wind protection around the blades or use protective WARNING: The exhaust fumes from the gloves when you do work on the blades.
  • Page 13 7. Lift the front edge of the cutting deck and move it 2. Release the clip on the front cover with the tool into the equipment frame. The plugs on the cutting attached to the ignition key, and remove the cover. deck, one on each side, must be put in the grooves on the equipment frame.

  • Page 14: Operation

    1. Download the Husqvarna Connect app on your mobile device. 2. Register in the Husqvarna Connect app. 3. Do the instruction steps in the Husqvarna Connect app to connect and register the product. To fill fuel 4. To adjust the seat springs, move the rubber stops below the seat as given in the illustration.
  • Page 15 1. Turn the knob counterclockwise to loosen. The drive system lever for the front axle for R 316TX AWD, R 316TsX AWD is found behind the left front wheel. 2. Adjust the height of the steering wheel. 3. Turn the knob clockwise to tighten.
  • Page 16 2. Lift the cutting deck and apply the parking brake. 6. When the engine starts, immediately release the ignition key to neutral position. 3. Move the throttle control to the middle position. CAUTION: Do not run the starter for more than 5 seconds at a time. If the engine does not start, wait 15 seconds before you try again.
  • Page 17 6. Press the lock button on the lift lever for the cutting CAUTION: To engage the blades when the deck and lower it to mow position. engine is at full speed causes strain on the drive belts. Do not apply full throttle until the cutting deck is lowered to the mow position.

  • Page 18: Maintenance

    4. To release the parking brake, press the parking • Start with a high cutting height and decrease it brake pedal again. gradually. • Cut with blades that rotate at high speed (highest To get a good cutting result Technical data on page permitted engine speed, see 109 ).
  • Page 19 Maintenance Daily maintenance Maintenance interval before operation in hours Clean the air filter Replace the air filter Replace the fuel filter Replace the spark plug Do a check of the parallelism of the cutting deck Lubricate the belt adjuster. Examine and adjust the steering wires Examine the muffler and heat deflector Examine the cutting deck for damages Adjust the parking brake.
  • Page 20 To remove the front cover engine becomes too hot. Let the engine cool before it is cleaned. Clean with water and a brush. 1. Release the clip on the front cover with the tool Grass cuttings around the muffler dry quickly and are a attached to the ignition key.
  • Page 21 1. The steering wires are correctly tightened if you can 5. Push the hose clips against the fuel filter. manually move them 5 mm up or down in the groove on the steering collar. 2. If the wires are too loose, let an authorized service agent adjust them.
  • Page 22 12. Attach the air filter cartridge with the hose clip. 2. Pull the fuse from the holder. 13. Attach the air filter cover and tighten the knobs. To examine and replace the spark plug 3. Replace the blown fuse with a new fuse of the same type, flat pin 20 A.
  • Page 23 Tire pressure 3. Connect one end of the red cable to the POSITIVE battery terminal (+) on the weak battery (A). The correct tire pressure is 60 kPa (0.6 bar / 8.5 PSI) on all 4 tires. To put the cutting deck in servicing 4.
  • Page 24 To examine and adjust the ground 2. Loosen the lock with your right hand. pressure from the cutting deck A correct ground pressure makes sure that the cutting deck moves along the surface but does not press too hard against it. 1.
  • Page 25 5. Measure the distance between the ground and the 4. Turn the lift strut to extend the stay or make it front and rear edges of the cutting deck. Make sure shorter. Extend the stay to lift the rear edge of the that the rear edge is 4–6 mm (1/5″) higher than the cover.
  • Page 26 2. Remove the 3 screws that hold the BioClip plug and WARNING: Incorrect blade type can remove the plug. cause objects to eject from the cutting deck and cause serious injury. Use only Technical data on the blades given in page 109 .
  • Page 27 Technical data on page 109 for Note: See recommended oil for R 316TX and R 316TX AWD, R 316TsX AWD. R 316TX AWD, R 316TsX AWD must have a synthetic oil.

  • Page 28: Troubleshooting

    3. Attach the belt shield and tighten the 2 screws. Troubleshooting Troubleshooting schedule If you cannot find a solution to your problems in this owner's manual, speak to your Husqvarna service agent. Problem Cause To apply and release the parking brake on The starter motor does not turn The parking brake is not applied.

  • Page 29: Engine

    Problem Cause To clean and change the air filter on page 97 . The engine apparently has no The air filter is clogged. See power The spark plug is defective. There is dirt in the carburetor or fuel line. The throttle cable is incorrectly adjusted. The transmission does not have The transmission cold air intake or the cooling fins are blocked.

  • Page 30: Transportation, Storage And Disposal

    Incorrect start procedure. Refer The symbol flashes. Start conditions on page 86 . Defective parking brake. Speak The symbol flashes to your Husqvarna servicing dea- quickly. ler. The operator presence control is 5 short disengaged when you try to start The symbol flashes.
  • Page 31 ® 4. If the product has Bluetooth , lock the product with Husqvarna Connect. Disengage the transmission before you tow the product. 5. Lower the cutting deck to the mow position. To engage and disengage the drive system on Refer to page 91 .
  • Page 32 Obey the local recycling requirements and applicable regulations. • Do not discard the battery as domestic waste. • Send the battery to a Husqvarna service agent or discard it at a disposal location for used batteries. 844 - 002 -...

  • Page 33: Technical Data

    Technical data Technical data R 316TX R 316TX AWD R 316TsX AWD Dimensions Length without cutting deck, mm 2028 2013 2013 Width without cutting deck, mm Height, mm 1165 1165 1165 Weight without cutting deck, with empty tanks, kg Wheel base, mm...
  • Page 34 R 316TX R 316TX AWD R 316TsX AWD Model K46H K574A K574RA Oil, class SF-CC SAE 10W/40 SAE 10W/50 Synthe- SAE 10W/50 Synthe- Electrical system Type 12V, negative eart- 12V, negative eart- 12V, negative eart- Battery 12V, 24Ah 12V, 24Ah...

  • Page 35: Service

    Warranty Transmission warranty Applies to R 316TX AWD, R 316TsX AWD only. The transmission warranty is only applicable if checks are done of the front and rear wheel rotation speed as given in the maintenance schedule. To prevent damage to the transmission system, let an authorized service agent adjust it.

  • Page 36: Ec Declaration Of Conformity

    DIRECTIVE of May 8, 2000 ”relating to the noise +46-36-146500, declares that the ride-on lawn mower emissions in the environment” 2000/14/EC. Husqvarna R 316TX and R 316TX AWD, R 316TsX The certificates have the numbers: 01/901/306, AWD from 2014's serial numbers and onwards (the year...
  • Page 37 Instrucciones originales Instruções originais Original instructions Istruzioni originali 1140403-30 2018-11-28...

This manual is also suitable for:

R 316tsxR 316tx awd

Table of Contents