Advertisement
CONTROLS AND INDICATORS
@
Equalizer preset MEMORY
key
This key is used to store an equalizer curve into the PGM
PRESET memories. First, select the desired equalizer curve
and then press this key. Then press any of the PRESET (A
to E) keys. The selected equalizer curve will be stored in
the memory indicated by the PRESET key pressed.
@
Equalizer (EQ, ON) key
Press this switch to ON and the frequency characteristic
will be modified by passing through the graphic equalizer.
In the
DEFEAT
position,
the
frequency
characteristic
remains unchanged.
@
EQ REC key
Used
when
recording
the source
onto
the tape' deck
through the equalized response of the graphic equalizer.
@ System memory
keys
@
SYSTEM
MEMORY
channel key (M-1/M-2)
Two
groups
of memory
can
be used
with the preset
channel key of the System Memory system. After entering
the memory preset mode by pressing the SYSTEM MEMO-
RY key, press the M-1
or M-2 key.
@ System MEMORY
key
This key is used to store the currently playing condition in
memory.
© DOLBY SURROUND
key
Press this key to activate or deactivate the surround output.
In the KR-V77R, MATRIX surround mode is automatically
entered when this key is pressed.
With the KR-V77R, when the speaker selector switch at
the rear is set to 80. OR MORE, the surround mode cannot
be obtained.
© Input selector switches
TAPE
1-Press
this switch
to play back a tape deck
connected to the TAPE
1 jacks.
TAPE 2/MONITOR - Press this switch to play back a tape
deck connected to the TAPE 2 jacks. (The TAPE 2 switch
is Operated in priority to any other audio input systems.)
VIDEO
1 - Selects the video recorders connected to the
VIDEO
1 jacks.
:
VIDEO
2-Select the video recorders connected to the
VIDEO 2 jacks.
CD - Selects the source connected the CD jacks.
PHONO -Selects
the
program
source
played
on
the
turntable.
TUNER - Selects the tuner mode.
AUX - Selects the source connected the AUX jacks.
@ AUDIO INJECTION key
Press this key ON when replacing the sound of VIDEO 2
with that of AUDIO source is required on dubbing between
VIDEO sources.
KR-V77F
@® MUTING
key
When the muting key is pressed, the MUTING indicator in
the display window
will.flash, and the overall
listening
sound level is reduced.
When the key is pressed again. you can restore exactly the
same listening level as before.
@ REMOTE SENSOR
Point the supplied remote control unit towards this sensor
and operate.
@® REMOTE
POWER
STAND
BY indicator
This indicator lights so far as the power cord is plugged
into the AC outlet. It is lit to show that the POWER switch
on the front panel or the POWER key on the remote control
unit can be activated.
@® BALANCE
contro! key
Governs the amount of sound coming from each paired
speakers to get optimum stereo effect. Pressing the RIGHT
key will decrease the left channel volume and pressing the
LEFT key will decrease the right channel volume. When the
BALANCE controls is pressed, display window shows the
BALANCE
indicator.
@ MAIN VOLUME control key
This contro! adjusts the left- and right-channel volumes
simultaneously.
Set it for the desired
listening
level.
Pressing the up (A) side increases the volume and pressing
the down (V) side decreases it.
Indicator (A) or (V) blinks when
this unit is operated
directly or with the remote control unit.
The volume level of the rear speakers are controlled at the
same time.
@ Band selector switches
FM
- For FM broadcasts.
AWMi - For AM
broadcasts.
@® Numeric (1 ~ 0/10) keys
Use these keys to:
1) input directly the digits of frequencies, or
2) store and recall frequencies in the preset channel.
@ Tunning function keys
@
DIGIT key
In the station name input mode, pressing this key advances
the column after selecting the character with the Tuning
UP/DOWN key. When this operation is repeated four time,
the station name input mode will be released automatically.
@
CHARACTER
key
Press this key to activate the station name input mode.
Advertisement
