Error Code - UREVO Strol Lite 2-in-1 User Manual

9

ERROR CODE

Error Code Fault Analysis
Communcation
interrupted between
E01
contoller and numercic
display.
E02 Flame protection
E05
Over current protection
E06
Software bug
E07
Communcation
E10 interrupted between signal
cable and console.
Once error code happened, you MUST stop workout immediately, Please contact with after
sale service if problem CAN NOT be solved after restart.
14
Resolutions
Unscrew motor hood and verify connection
between controller and numeric display.
Please contact with after sale service if E01
code has not been eliminated.
Notice: Always power off and unplug power
cord before processing.
1. Unscrew motor hood and verify connection
between controller and motor.
2. Power supply interrput due to connector
loosen or out, please unscrew motor hood
to check.
3. Please contact with after sale service if
problem CAN NOT solved by above process.
1. Due to user over limited 120Kg.
2. Open to check any foreign objects blocked
moving parts. ( such as: drive motor, idler
roller, driver roller, walking belt )
3. Walking belt is overtightened or lack of
lubricant. ( please see detail chapters relate
to belt tension and lubricant process )
Replace new controller.
1. Unscrew console box and verify connection
between singal cable and console.
2. Unscrew console box and verify internal lead
wires whether are damaged or pierced.
3. Replace new console PCBA board.