PowerXL Power AirFryer Oven Delux CM002 Owner's Manual page 9

Using the Accessories
Rotisserie Spit Assembly
1. Insert each Skewer point through holes on the left
Skewer Rack (FIG. C).
2. Squeeze the clip end of each Skewer as you insert
into the opposite Skewer Rack slot to secure.
3. Release clip to securely rest in slot as shown
(FIG. D).
FIG. C - LEFT SIDE
Placing Rotisserie Spit or
Rotating Mesh Basket into Unit
1. Insert the left side of the assembled Spit or Basket first
into the Rotisserie Shaft socket. Be sure the Rotisserie
Shaft is in place to engage rotation (FIG. E).
2. Place the right side onto the hanger (FIG. F).
Removing Rotisserie Spit
or Rotating Basket from Unit
1. Open Unit door to pause cooking cycle or turn Unit off by
pressing the Power Button.
2. Insert Rotisserie Fetch Tool beneath the Rotisserie Shaft.
3. Lift the right side of the Rotisserie Fetch Tool at a slight
angle to clear the bracket, then shift to the right until the
left side of the Shaft slides out of the Rotisserie Shaft
socket.
4. Carefully remove the rotisserie food from the oven.
4. Repeat steps 3–6 in a uniform manner around the
Skewer Rack. Make sure Skewers
are evenly spaced.
5. Tighten the Set Screws to make sure they
are securely in place.
6. Use caution while inserting the Spit into the Unit
to prevent getting poked by the Skewer ends.
FINAL ASSEMBLY
IMPORTANT: See the Final Assembly diagram (page 8) to help identify
the left and right sides of the Rotisserie Shaft before placing it in
the Unit. The right side has two notches, and the left has one.
FIG. D - RIGHT SIDE
FIG. E - LEFT SIDE
FIG. F - RIGHT SIDE
Power AirFryer Oven™ | Model: CM002
9