Using The Accessories - PowerXL Power AirFryer Oven Delux CM002 Owner's Manual

Using the Accessories

Placing Air Flow Racks into Unit
1. Insert Drip Tray into bottom of the Unit.
2. Place Air Flow Racks into Unit by sliding through
the side grooves and onto the back lip (FIG. A).
3. Place Air Flow Racks closer to the top heating
element for faster cooking and added crisp (FIG. B).
4. Rotate the Air Flow Racks mid-cycle for even
cooking.
Components
Rotisserie Shaft & Skewers Racks
1. Place the two Skewer Racks at each end of
the Rotisserie Shaft. Make sure the Set Screws
are on the outer side of the Rotisserie Shaft.
FINAL ASSEMBLY
FRONTAL VIEW
ROTISSERIE SHAFT
LEFT SIDE
8
P ower AirFryer Oven™ | Model: CM002
SKEWER RACK (x2)
FRONTAL VIEW
SET SCREW
FIG. A
ROTISSERIE SHAFT
LEFT SIDE RIGHT SIDE
2. Slightly tighten Set Screws. Do not overtighten as
you may need to adjust the tightness after
you insert the Skewers.
3. Carefully poke Skewers through food.
SKEWER RACKS
FIG. B
SKEWERS SET SCREWS
(x10) (x2)
SET SCREW
ROTISSERIE SHAFT
RIGHT SIDE