ABB Sace Emax 2 Installation, Operation And Maintenance Instructions page 26

Emax e1.2 low voltage air circuit-breakers

Hide thumbs Also See for Sace Emax 2:

Table of Contents

ABB | SACE Emax 2

Change of position of the

If the circuit-breaker is supplied equipped with terminals of the horizontal/rear type, it is possible at

vertical/horizontal terminals

any moment to switch from horizontal to vertical and vice versa. (see Figure 62 and Figure 63). Lock the

screws with tightening torque 20 Nm - 177 lb in.

Figure 62

Figure 63

Management operations

5 - Installation

Table of Contents