Replacement / Changing Activities; Type Of Lubrication In Gearboxes - ABB IRB 2600ID Product Manual

3.4 Replacement / Changing activities

3.4.1 Type of lubrication in gearboxes

Introduction
This section describes where to find information about the type of lubrication,
article number and the amount of lubrication in the specific gearbox. It also
describes the equipment needed when working with lubrication.
Type and amount of oil in gearboxes
Information about the type of lubrication, article number as well as the amount in
the specific gearbox can be found in Technical reference manual - Lubrication in
gearboxes available for registered users on myABB Business Portal,
www.abb.com/myABB.
Location of gearboxes
The figure shows the location of the gearboxes.
xx0900000312
Product manual - IRB 2600
3HAC035504-001 Revision: AD
Note
The type of oil pre-filled in axis-4 gear differs from the type of oil recommended
for field maintenance, due to differences in factory and customer sites
prerequisites. The two types of oil are fully equal and compatible.
Use the type of oil specified in Technical reference manual - Lubrication in
gearboxes, even though it differs from the oil specified in WebConfig.
© Copyright 2009-2023 ABB. All rights reserved.
3 Maintenance
3.4.1 Type of lubrication in gearboxes
Continues on next page
151