Erbe VIO 3 Quick Start Manual

This quick start guide is no substitute for briefing and user manual. This quick start guide does not include any safety notes. Make your-
self familiar with the safety notes in the user manuals.
Necessary operating steps
1
Switch on the unit
2
Select program
 Select a program without connected instrument cable. If an instru-
ment cable has been already plugged in, disconnect it.
3
Apply and connect neutral electrode
 Apply neutral electrode on appropriate location. The illustration is
just an example. The long edge of the neutral electrode
point to the procedural field.
4
Monitor neutral electrode
If the red neutral electrode symbol lights up, check the following:
• Is the neutral electrode correctly connected to the unit?
• Does the long edge of the neutral electrode point to the procedural
field?
• Does the neutral electrode have sufficient contact to the skin?
ELECTROSURGERY
QUICK START GUIDE
VIO
5
1. If subprograms are available, select the appropriate subprogram
2. Touch the instrument symbol.
3. Connect the instrument to the socket with flashing socket frame.
6
(1) must
Correct
7
Error
3
®
Connecting the instrument
tab (operating step not shown).
Checking the instrument settings
For APC applications, open argon bottle
80114-411_V24817 2023-05