Preparing Cables - Huawei STS-3000K-H1 Installation Manual

STS-(3000K, 6000K)-H1 Smart Transformer Station
(Spain, Eiffage Turroneros)
Installation Guide






7.1 Preparing Cables



Figure 7-1 Cable connections (configure the components in the dotted box as required)
(A) Side view of the STS LV
cabinet
(D) Solar inverter
(G) Smart array controller
(SACU)
(J) Power grid
Issue 02 (2020-02-21)
Cable ties should be neatly cut without sharp burs, evenly distributed, bound to a proper
strength, and fastened towards the same direction.
The bundled cables should be close to each other, straight, and neat.
The redundant cables should be coiled neatly for identification.
Cables should not be overly bent to avoid damage the cable cores.
Cables should not be tied where they bend.
Cables should have sufficient current-carrying capacity and should not be overloaded.
Cables with the same functions should have the same specifications and type.
Copyright © Huawei Technologies Co., Ltd.
(B) Front view of the
STS
(E) AC switch box
(H) Support tracking
system
(K) STS
7 Connecting Cables
(C) Side view of the STS MV
room
(F) UPS
(I) Power-consuming device
46