Operating The Pressure Release Valve; Removing The Fuse Link Of The Pressure Release Valve; Installing The Rainproof Canopy For The Pressure Release Valve - Huawei STS-3000K-H1 Installation Manual

STS-(3000K, 6000K)-H1 Smart Transformer Station
(Spain, Eiffage Turroneros)
Installation Guide

5.3 Operating the Pressure Release Valve

The pressure release valve can be operated in two ways. Choose one depending on the
situation.

5.3.1 Removing the Fuse Link of the Pressure Release Valve

Step 1 Remove the fuse link of the pressure release valve as shown in the following figure.
Figure 5-6 Removing the fuse link
----End
5.3.2 Installing the Rainproof Canopy for the Pressure Release
Valve
Step 1 Remove the cover from the pressure release valve.
Step 2 Install the rainproof canopy delivered with the STS on the pressure release valve.
Issue 02 (2020-02-21) Copyright © Huawei Technologies Co., Ltd.
5 Operating Components
36