Operation; Model Features; Indicator Panel - DeWalt DCSNP2142 Instruction Manual

Model Features

G1
F
B
FEATURES
Snow blower controls and features are described below and
illustrated above (Figure 10).
NOTE: This Operator's Manual covers several models. Snow
blower features may vary by model. Not all features in this
manual are applicable to all snow blower models and the snow
blower depicted may differ from yours.
NOTE: All references to the left or right side of the snow blower
are from the operator's position. Any exceptions will be noted.
A. BATTERY (IF EQUIPPED)
The batteries are used to power the snow blower.
NOTE: Select models are sold as snow blower only. Batteries are
available separately.
B. BATTERY CHARGER (IF EQUIPPED)
The battery charger is used to charge batteries.
NOTE: Select models are sold as snow blower only. Battery
chargers are available separately.
C. SAFETY KEY
The safety key is a safety device. It must be fully inserted in order
for the motor to start. Remove the safety key when the snow
blower is not in use.
D. START BUTTON
Turns power on/off to the snow blower motor.

OPERATION

D
G2
E
K
M
A
Figure 10
12
C
J
K
L
E. MODE BUTTON
The mode button is used to cycle through the Three operational
modes of the snow blower:
1. Eco Mode - Reduces auger speed and power to increase
battery run time in light snow conditions.
2. Standard Mode- Normal operating speed and power,
used for most applications.
NOTE: The snow blower will start in standard mode.
3. Max Power Mode - Increases auger speed and power.
Used in heavy, wet snow conditions. This mode will
reduce run time.
F. INDICATOR PANEL
The indicator panel provides the following information:
2 2
1 1
4 4
H
I
3 3
5 5
1 1