Solutions When "No Signal" Message Appears - Epson EH-LS650B User Manual

• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limits. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
• If you are trying to view online content, make sure you have an active Internet connection.
• Make sure you selected the correct EDID setting in the projector's Picture menu, if available for your
image source.
• When sending 18 Gbps images such as 4K 60 Hz, use an HDMI cable (premium high-speed).
• If the other solutions do not solve the problem, reset all of the projector settings using the option in the
Settings menu.
Parent topic:
Related references
Projector Light Status
Projector Feature Settings - Settings Menu
Image Quality Settings - Picture Menu
Related tasks
Connecting to an HDMI Video Source

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
• Press the
sources. Wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
• Connect the video source directly to the projector.
• Check that the source device is not sending a signal that has too high a bandwidth for the cable or the
projector. Click the link below to see the supported video display formats.
• If the other solutions do not solve the problem, reset all of the projector settings using the option on the
Settings menu.
Solving Image or Sound Problems
Source Search button on the remote control and then select from the displayed
98