Solving Image Or Sound Problems - Epson EH-LS650B User Manual

Status light
Orange
Flashing orange
Parent topic:

Solving Image or Sound Problems

Check the solutions in these sections if you have any problems with projected images or sound.
Status and solution
Projector has overheated and turned off. Leave it turned off to cool
down and wait about five minutes.
• Make sure that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
• Make sure the environmental temperature is not too hot.
• Clean or replace the air filter.
• If operating the projector at high altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the projector and contact Epson for
help.
Movement detection warning. A beep sounds and a warning message
is displayed. The brightness of the light source is reduced.
• Make sure that no one is looking into the projection window. Move
away from the projection window.
• Clean the motion sensor if there is no one near the projection
window.
Laser warning. Turn the projector off, unplug it, and contact Epson for
help.
Laser has a problem. Turn the projector off, unplug it, and contact
Epson for help.
A fan or sensor has a problem. Turn the projector off, unplug it, and
contact Epson for help.
Obstacle detection error. If there are no obstacles interfering with the
projection window, turn the projector off, unplug it, and contact Epson
for help.
Internal projector error. Turn the projector off, unplug it, and contact
Epson for help.
Solving Problems
96