Epson EH-LS100 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EH-LS100
  6. User manual

Epson EH-LS100 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EH-LS100 and is the answer not in the manual?

Questions and answers

Related Manuals for Epson EH-LS100

Summary of Contents for Epson EH-LS100

  • Page 1 User's Guide...

  • Page 2: Table Of Contents

    Contents Notations Used in This Guide Installing Batteries in the Remote Control ........26 Remote Control Operation.............. 27 Introduction to Your Projector Using Basic Projector Features Projector Parts and Functions ............8 Turning On the Projector ..............29 Projector Parts - Front/Side......................8 Home Screen...........................
  • Page 3 Monitoring and Controlling the Projector Using the Remote Control as a Pointer.......... 75 Saving a User's Logo Image ............76 Epson Projector Management ............99 Saving a User Pattern ..............78 Setting Up Projector Network E-Mail Alerts ....... 100 Color Difference Correction when Projecting from Multiple Network Projector E-mail Alert Messages .................
  • Page 4 Contents Maintaining the Projector Cable Layouts ..........................102 PJLink Support ................104 Projector Maintenance ..............133 Crestron RoomView Support ............105 Cleaning the Projection Window..........134 Setting Up Crestron RoomView Support................105 Controlling a Networked Projector Using Crestron RoomView........ 105 Cleaning the Obstacle Sensor............
  • Page 5 Contents Solutions to Projector Power or Shut-Off Problems............153 Restriction of Use ........................174 Solutions to Problems with the Remote Control............153 Operating System References....................174 Solutions to Password Problems................... 154 Trademarks............................ 174 Copyright Notice......................... 175 Solving Network Problems ............155 Copyright Attribution........................

  • Page 6: Notations Used In This Guide

    Notations Used in This Guide Safety Symbols The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely. Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property. This symbol indicates information that, if ignored, could possibly result in personal injury or even death.

  • Page 7: Introduction To Your Projector

    Introduction to Your Projector Refer to these sections to learn more about your projector's features and part names. g g Related Links • "Projector Parts and Functions"...

  • Page 8: Projector Parts And Functions

    Projector Parts and Functions The following sections explain the projector parts and their functions. Projector Parts - Front/Side g g Related Links • "Projector Parts - Front/Side" • "Projector Parts - Top/Side" • "Projector Parts - Interface" p.10 • "Projector Parts - Base" p.11 •...

  • Page 9: Projector Parts - Top/Side

    Projector Parts and Functions Name Function Projector Parts - Top/Side Air exhaust vent Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent.

  • Page 10: Projector Parts - Interface

    Projector Parts and Functions Name Function Projector Parts - Interface Obstacle sensor Detects obstacles that are interfering with the projection area. Remote receiver Receives signals from the remote control. Projection window Images are projected from here. Warning • Do not look into the projection window while projecting.

  • Page 11: Projector Parts - Base

    Projector Parts and Functions Name Function Name Function Audio port Inputs audio from equipment connected to the Video Wireless LAN module Install the wireless LAN module. port. slot Inputs audio from other devices when projecting images from the device connected to the USB-A port. g g Related Links From now on, referred to as the Audio 2 port.

  • Page 12: Projector Parts - Control Panel

    Projector Parts and Functions Name Function Name Function Rear feet Turn to extend and retract the feet to adjust the [Source Search] Changes to the next input source. horizontal tilt. button Security cable Pass a commercially available wire lock through here [Enter] button [ ] Enters the current selection and moves to the next level attachment point...

  • Page 13: Projector Parts - Remote Control

    Projector Parts and Functions Projector Parts - Remote Control Name Function Turns the projector on or off. Power button [ From now on, referred to as the power button. [Computer] button Selects the Computer port as the image source. [HDMI/Video] Switches the image source between the HDMI and button Video ports.
  • Page 14 Projector Parts and Functions • "Projecting Two Images Simultaneously" p.62 Name Function • "Using the Remote Control as a Wireless Mouse" p.73 Strap attachment Allows you to attach a commercially available strap to • "Using the Remote Control as a Pointer" p.75 point the remote control.

  • Page 15: Setting Up The Projector

    Setting Up the Projector Follow the instructions in these sections to set up your projector. g g Related Links • "Projector Placement" p.16 • "Projector Connections" p.17 • "Installing Batteries in the Remote Control" p.26 • "Remote Control Operation" p.27...

  • Page 16: Projector Placement

    Projector Placement You can place the projector on almost any flat surface to project an image. Warning Note the following points when selecting a projector location: • Do not cover the projector's air intake or air exhaust vents. If the vents are •...

  • Page 17: Projector Connections

    Projector Connections You can connect the projector to a variety of computer, video, and audio g g Related Links sources to display presentations, movies, or other images, with or without • "Connecting to a Computer for VGA Video and Audio" p.17 sound.

  • Page 18: Connecting To A Computer For Usb Video And Audio

    Connect the other end to any available USB port on your computer. Turn on the projector and your computer. Do one of the following to install the Epson USB Display software: Connecting to a Computer for USB Video and Audio You only need to install this software the first time you connect the projector to the computer.

  • Page 19: Connecting To A Computer For Hdmi Video And Audio

    • If the projector does not project any images, do one of the following: • Windows: Click All Programs > EPSON Projector > Epson USB Display > Epson USB Display Ver.x.xx. • Mac: Double-click the USB Display icon in the Application folder.

  • Page 20: Connecting To Video Sources

    Projector Connections • You may not be able to project correctly, depending on the model • Charging may not work when using a lot of power, such as and settings of the smartphone or tablet. when playing a movie. • You may not be able to connect an MHL cable to all devices. Contact •...

  • Page 21: Connecting To An Hdmi Video Source

    Projector Connections g g Related Links Connecting to an HDMI Video Source • "Projector Setup Settings - Extended Menu" p.119 If your video source has an HDMI port, you can connect it to the projector using an HDMI cable and send the image source's audio with the projected Connecting to a Component-to-VGA Video Source image.

  • Page 22: Connecting To A Composite Video Source

    Projector Connections Connect the VGA connector to a Computer port on the projector. If your image colors appear incorrectly, you may need to change the Input Signal setting in the projector's Signal menu. Signal > Advanced > Input Signal g g Related Links •...

  • Page 23: Connecting To External Usb Devices

    Projector Connections Connect the audio cable to your video source's audio-out ports. • Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class- Connect the other end to the projector's Audio 2 port. compliant.

  • Page 24: Disconnecting A Usb Device

    Projector Connections Connect the USB cable or USB flash drive to the projector's USB-A port Connecting to External Output Devices as shown. Follow the instructions in these sections to connect external devices to the projector. g g Related Links • "Connecting to a VGA Monitor" p.24 •...

  • Page 25: Connecting To External Speakers

    Projector Connections Connect the external monitor's cable to your projector's Monitor Out Make sure your computer or video source is connected to the projector port. with both audio and video cables as necessary. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.

  • Page 26: Installing Batteries In The Remote Control

    Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Warning Attention Check the positions of the (+) and (–) marks inside the battery holder to ensure the batteries are inserted the correct way. If the batteries are not used Make sure you read the Safety Instructions before handling the batteries.

  • Page 27: Remote Control Operation

    Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here. Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands.

  • Page 28: Using Basic Projector Features

    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. g g Related Links • "Turning On the Projector" p.29 • "Turning Off the Projector" p.32 • "Selecting the Language for the Projector Menus" p.33 •...

  • Page 29: Turning On The Projector

    Turning On the Projector Turn on the computer or video equipment you want to use after you turn on • When Quick Startup is enabled in the projector's Extended the projector. menu, the projector becomes ready for use in several seconds the next time you press the power button.

  • Page 30: Home Screen

    Turning On the Projector Press the arrow buttons on the control panel or remote control to select a • When the Direct Power On setting is set to On in the projector's menu item, and then press [Enter]. Extended menu, the projector turns on as soon as you plug it in. Note that the projector also turns on automatically in cases such as recovery from a power outage.
  • Page 31 Turning On the Projector The Home screen disappears after 10 minutes of inactivity. g g Related Links • "Projector Setup Settings - Extended Menu" p.119 • "Using a QR Code to Connect a Mobile Device" p.95 • "Using the Projector's Menus" p.110 •...

  • Page 32: Turning Off The Projector

    Turning Off the Projector Turn off the projector after use. • Turn off this product when it is not in use to prolong the life of the projector. Light source life varies depending on the mode selected, environmental conditions, and usage. Brightness decreases over time. •...

  • Page 33: Selecting The Language For The Projector Menus

    Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. Turn on the projector. Press the [Menu] button on the control panel or remote control. Select the Extended menu and press [Enter].

  • Page 34: Focusing The Image

    Focusing the Image You can display the test pattern, and then adjust the focus. Select Pattern and press [Enter]. We recommend adjusting the focus at least 10 minutes after you start projecting, because images are not stable right after turning on the projector.
  • Page 35 Focusing the Image Open the air filter cover. Move the focus lever and focus to the center-bottom of the projected screen.
  • Page 36 Focusing the Image Check that the focus matches the corners of the projected screen. To remove the test pattern, press the [Esc] button on the remote control or the control panel. If any areas are out of focus, use the focus lever to adjust until the corners are the same focus.

  • Page 37: Adjusting The Image Height

    Adjusting the Image Height If you are projecting from a table or other flat surface and the image is too If the image is tilted, rotate the rear feet to adjust their height. high or low, you can adjust the image height using the projector's adjustable feet.

  • Page 38: Image Shape

    Image Shape You can project an even, rectangular image by placing the projector directly Press one of the keystone adjustment buttons on the control panel to in front of the center of the screen and keeping it level. If you place the display the Keystone adjustment screen.

  • Page 39: Correcting The Image Shape With Quick Corner

    Image Shape Press a keystone button to adjust the image shape. Correcting the Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular. Turn on the projector and display an image. Press the [Menu] button on the control panel or remote control.
  • Page 40 Image Shape Select the Settings menu and press [Enter]. Select Quick Corner and press [Enter]. Press [Enter] again if necessary. You see the area selection screen. Use the arrow buttons to select the corner of the image you want to adjust.

  • Page 41: Correcting Image Shape With Curved Surface

    Image Shape Correcting Image Shape with Curved Surface • If you see this screen, you cannot adjust the shape any further in the direction indicated by the gray triangle. You can use the projector's Arc Correction setting to adjust the shape of an image projected on a curved or spherical surface.
  • Page 42 Image Shape Select the Settings menu and press [Enter]. Select Arc Correction and press [Enter]. Select Arc Correction and press [Enter]. Select Geometry Correction and press [Enter]. You see the area selection screen. Use the arrow buttons to select the area of the image you want to adjust, then press [Enter].

  • Page 43: Loading Image Shape Setting From Memory

    Image Shape To reset the Arc Correction settings, hold down [Esc] for about To save the current shape of an image you have adjusted, select two seconds while the area selection screen is displayed, and then Save Memory in the Arc Correction setting. You can save up to select Yes.
  • Page 44 Image Shape Hold down the [Num] button on the remote control, and then press the numeric button (1, 2, or 3) that matches the number of the saved setting. The illustration above is only an example. When you have finished loading the settings, follow the on-screen instructions.

  • Page 45: Resizing The Image With The Buttons

    Resizing the Image with the Buttons You can resize the image using the Wide and Tele buttons. We recommend adjusting the image size at least 10 minutes after you start projecting, because images are not stable right after turning on the projector.

  • Page 46: Adjusting The Image Position

    Adjusting the Image Position You can use the Image Shift feature to adjust the image position without Use the arrow buttons on the projector or remote control to adjust the moving the projector. image position. • This feature is not available if the Zoom option is set to the widest setting.

  • Page 47: Selecting An Image Source

    Selecting an Image Source When multiple image sources are connected to the projector, such as a This screen is displayed when no image signal is detected. computer and DVD player, you can switch from one image source to the Check the cable connections between the projector and image other.
  • Page 48 Selecting an Image Source • Press the [Home] button on the control panel or remote control. Then select the source you want to use from the screen displayed.

  • Page 49: Image Aspect Ratio

    Image Aspect Ratio The projector can display images in different width-to-height ratios called To display images without black bars, set Resolution to Wide or aspect ratios. Normally, the input signal from your video source determines Normal in the projector’s Signal menu according to the computer’s the image's aspect ratio.

  • Page 50: Projected Image Appearance With Each Aspect Mode

    Image Aspect Ratio Projected Image Appearance with Each Aspect Mode Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. See the following table to confirm the position of black bands and cropped images. The image for Native varies depending on the input signal.

  • Page 51: Color Mode

    Color Mode The projector offers different color modes to provide optimum brightness, You can also set the Color Mode setting in the projector's Image contrast, and color for a variety of viewing environments and image types. menu. You can select the mode designed to match your image and environment, or experiment with the available modes.
  • Page 52 Color Mode Press the [Menu] button on the control panel or remote control. Select Dynamic Contrast and press [Enter]. Select the Image menu and press [Enter]. Choose one of the following options and press [Enter]: • High Speed to adjust brightness as soon as the scene changes. •...

  • Page 53: Adjusting The Image Color

    Adjusting the Image Color You can fine-tune various aspects of how colors are displayed in your Select the Image menu and press [Enter]. projected images. g g Related Links • "Adjusting the Hue, Saturation, and Brightness" p.53 • "Adjusting the Gamma" p.54 •...

  • Page 54: Adjusting The Gamma

    Adjusting the Image Color • To adjust the overall color brightness of the color, adjust the Select the Image menu and press [Enter]. Brightness setting. Press [Menu] or [Esc] to exit the menus. Adjusting the Gamma You can correct differences in projected image colors that occur between Select Advanced and press [Enter].

  • Page 55: Adjusting The Skin Tone

    Adjusting the Image Color the dark areas of images become brighter, but the color saturation for Select the Image menu and press [Enter]. lighter areas may become weaker. Press [Menu] or [Esc] to exit the menus. Select White Balance and press [Enter]. Adjusting the Skin Tone Select G-M Correction and press [Enter].

  • Page 56: Adjusting The Brightness

    Adjusting the Brightness You can adjust the brightness of your projector's light source. Select Brightness Settings and press [Enter]. Turn on the projector and switch to the image source you want to use. Press the [Menu] button on the control panel or remote control. Select the ECO menu and press [Enter].

  • Page 57: Light Source Life Span

    Adjusting the Brightness g g Related Links Brightness Level setting Hours • "Light Source Life Span" p.57 30000 hours • "Projector Specifications" p.163 • "Projector Setup Settings - ECO Menu" p.127 Light Source Life Span The estimated life span of the light source varies depending on the Brightness Level setting.

  • Page 58: Controlling The Volume With The Volume Buttons

    Controlling the Volume with the Volume Buttons The volume buttons control the projector's internal speaker system. Caution You can also control the volume of any external speakers you connected to the projector. Do not start a presentation at a high volume setting. Sudden loud noises may cause hearing loss.

  • Page 59: Adjusting Projector Features

    Adjusting Projector Features Follow the instructions in these sections to use your projector's adjustment features. g g Related Links • "HDMI Link Features" p.60 • "Projecting Two Images Simultaneously" p.62 • "Projecting a PC Free Presentation" p.65 • "Shutting Off the Image and Sound Temporarily" p.70 •...

  • Page 60: Hdmi Link Features

    HDMI Link Features When an audio/video source that meets the HDMI CEC standard is Press the [Menu] button on the control panel or remote control. connected to the projector's HDMI port, you can use the projector's remote control to control certain features of the linked device. Example: Projector, audio/video system, and multi-media players connection Select the Settings menu and press [Enter].
  • Page 61 HDMI Link Features Select the device you want to control and project the image from, and • Power Off Link only works when the connected device's press [Enter]. CEC power link function is enabled. • Note that depending on the status of the connected device (for example, if it is recording), the device may not be turned off.

  • Page 62: Projecting Two Images Simultaneously

    Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images Press the [Split] button on the remote control. from different image sources. You can control the split screen feature using the remote control or the projector menus. The currently selected input source moves to the left of the screen.

  • Page 63: Unsupported Input Source Combinations For Split Screen Projection

    Projecting Two Images Simultaneously To select an input source for the other image, select the Source setting, Depending on the video input signals, the images may not press [Enter], select the input source, select Execute, and press [Enter]. appear at the same size even if you select Equal. To select the audio, select Audio Source, press [Enter], select an audio option, and press [Enter].
  • Page 64 Projecting Two Images Simultaneously • Setting the projector's menu • E-Zoom • Switching the aspect mode (the aspect mode is set to Normal) • Operations using the [User] button on the remote control • Dynamic Contrast Image restrictions • If you make adjustments such as Brightness, Contrast, Color Saturation, Tint, and Sharpness in the projector's Image menu, you can apply them only to the image on the left.

  • Page 65: Projecting A Pc Free Presentation

    Projecting a PC Free Presentation You can use your projector's PC Free feature whenever you connect a USB File contents File type Details device that contains compatible presentation files. This lets you quickly and (extension) easily display a presentation and control it using the projector's remote Image .jpg Make sure the file is not:...

  • Page 66: Starting A Pc Free Slide Show

    Projecting a PC Free Presentation The PC Free file list screen is displayed. • Some commercially available USB card readers may not be compatible with the projector. • The projector can recognize up to 5 cards inserted into the connected card reader at one time.

  • Page 67: Starting A Pc Free Movie Presentation

    Projecting a PC Free Presentation • To display a slide show of all the images in a folder, press the arrow Turn off the USB device, if necessary, and then disconnect the device buttons to highlight the Slideshow option at the bottom of the screen from the projector.

  • Page 68: Pc Free Display Options

    Projecting a PC Free Presentation PC Free Display Options • If the Select Drive screen is displayed, press the arrow buttons to select the drive and press [Enter]. • To display movie files on the other USB drive, highlight Select You can select these display options when using PC Free.
  • Page 69 Projecting a PC Free Presentation Setting Options Description Effect No effect Wipe Transitions between images using a wipe effect Dissolve Transitions between images using a dissolve effect Random Transitions between images using a random variety of effects...

  • Page 70: Shutting Off The Image And Sound Temporarily

    Shutting Off the Image and Sound Temporarily You can temporarily turn off the projected image and sound if you want to redirect your audience's attention during a presentation. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.

  • Page 71: Stopping Video Action Temporarily

    Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped Press the [Freeze] button on the remote control to stop the video action.

  • Page 72: Zooming Images

    Zooming Images You can draw attention to parts of a presentation by zooming into a portion The enlarged image is projected and the enlargement ratio is displayed of the image and enlarging it on the screen. on the screen. You can enlarge the selected area to between one to four times in 25 incremental steps.

  • Page 73: Using The Remote Control As A Wireless Mouse

    Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can Use the following buttons on the remote control to control your control projection at a distance from the computer. presentation: You can use the wireless mouse features with Windows Vista and later, or OS X 10.7.x and later.
  • Page 74 Using the Remote Control as a Wireless Mouse g g Related Links • "Zooming Images" p.72 • "Using the Remote Control as a Pointer" p.75...

  • Page 75: Using The Remote Control As A Pointer

    Using the Remote Control as a Pointer You can use the projector's remote control as a pointer to help you focus your g g Related Links audience on important information on the screen. The default pointer shape • "Projector Feature Settings - Settings Menu" p.116 is an arrow.

  • Page 76: Saving A User's Logo Image

    Saving a User's Logo Image You can save an image on the projector and display it whenever the projector Select User's Logo and press [Enter]. turns on. You can also display the image when the projector is not receiving an input signal. This image is called the user's logo screen. You can select a photo, graphic, or company logo as the user's logo, which is useful in identifying the projector's owner to help deter theft.
  • Page 77 Saving a User's Logo Image Use the arrow buttons to surround the image area you want to use as Select Yes and press [Enter]. the user's logo and press [Enter]. The user's logo is overwritten and a completion message appears. Press [Esc] to exit the message screen.

  • Page 78: Saving A User Pattern

    Saving a User Pattern There are four types of patterns pre-registered in the projector, such as ruled Select Pattern and press [Enter]. lines and grid patterns. You can project these patterns to aid in presentations using the Pattern Display settings in the Settings menu. You can also save the image that is currently being projected as a User Pattern.

  • Page 79: Color Difference Correction When Projecting From Multiple Projectors

    Color Difference Correction when Projecting from Multiple Projectors When lining up multiple projectors to project images, you can correct the Use the arrow buttons to select the identification number you want to brightness and color tone of each projector's image so that the images match use for the projector.
  • Page 80 Color Difference Correction when Projecting from Multiple Projectors Aim the remote control at the target projector and press the [ID] While holding the [ID] button, press the number button that matches button. the ID of the projector you want to operate. The current Projector ID is displayed on the projected screen.

  • Page 81: Matching Multiple-Projector Display Quality

    Color Difference Correction when Projecting from Multiple Projectors Matching Multiple-Projector Display Quality You can match the display quality of multiple projectors that will project next to each other. Turn on all the projectors on which you want to match the display quality.

  • Page 82: Projector Security Features

    Projector Security Features You can secure your projector to deter theft or prevent unintended use by • "Selecting Password Security Types" p.83 setting up the following security features: • "Entering a Password to Use the Projector" p.84 • Password security to prevent people who do not know the password from using the projector, and prevent changes to the startup screen and other Setting a Password settings.

  • Page 83: Selecting Password Security Types

    Projector Security Features Select Password and press [Enter]. Enter the password again. You see the message "Password accepted". If you enter the password incorrectly, a message is displayed prompting you to re-enter the password. Press [Esc] to return to the menu. Make a note of the password and keep it in a safe place.

  • Page 84: Entering A Password To Use The Projector

    • If you have forgotten the password, make a note of the "Request Code: xxxxx" number that appears on the screen and contact Epson for help. • If you continue to repeat the above operation and input the wrong password 30 times in succession, the message "The projector's operation...

  • Page 85: Unlocking The Projector's Buttons

    Projector Security Features Select the Settings menu and press [Enter]. Select Control Panel Lock and press [Enter]. Select Lock Setting and press [Enter]. Select one of these lock types and press [Enter]: • To lock all of the projector's buttons, select Full Lock. •...

  • Page 86: Installing A Security Cable

    Projector Security Features Settings > Lock Setting > Control Panel Lock g g Related Links • "Projector Feature Settings - Settings Menu" p.116 Installing a Security Cable You can install the security cable on the projector to deter theft. • Use the security slot on the projector to attach a Kensington Microsaver Security system.

  • Page 87: Using The Projector On A Network

    Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. g g Related Links • "Wired Network Projection" p.88 • "Wireless Network Projection" p.91...

  • Page 88: Wired Network Projection

    After connecting and setting up the projector as described here, install Epson iProjection (Windows/Mac) from the Epson Projector Software CD-ROM (if available) or Web site.
  • Page 89 (User name is EPSONREMOTE; default password is guest.) • Moderator Password lets you enter a four-digit number password for accessing the projector as a moderator using Epson iProjection. (No password is set by default.) • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
  • Page 90 Wired Network Projection Select the Wired LAN menu and press [Enter]. Press the [LAN] button on the remote control. The wired network settings complete when you see the correct IP address on the LAN standby screen. ＊＊＊＊＊＊ Select IP Settings and press [Enter]. Select your IP Settings as necessary.

  • Page 91: Wireless Network Projection

    You can send images to your projector through a wireless network. Attention To do this, you must install the Epson 802.11b/g/n wireless LAN module, and Never remove the module while its indicator is blue or flashing, or while you are then set up your projector and computer for wireless projection using the projecting wirelessly.

  • Page 92: Selecting Wireless Network Settings Manually

    Wireless Network Projection Connect the Wireless LAN module to the wireless LAN module slot. Select On as the Wireless LAN Power setting. Selecting Wireless Network Settings Manually Before you can project from your wireless network, you need to select network settings for the projector. Select Network Configuration and press [Enter].
  • Page 93 (User name is EPSONREMOTE; default password is guest.) • Moderator Password lets you enter a four-digit number password for accessing the projector as a moderator using Epson iProjection. (No password is set by default.) • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.

  • Page 94: Selecting Wireless Network Settings In Windows

    Wireless Network Projection To prevent the SSID or IP address from being displayed on the LAN When connecting in Advanced connection mode, select the network standby screen and Home screen, set the SSID Display setting or the IP name (SSID) of the network the projector is connecting to. Address Display setting to Off.

  • Page 95: Using A Qr Code To Connect A Mobile Device

    • Make sure you have installed the latest version of Epson iProjection on your device (V1.3.0 or later supports this feature). • You can download Epson iProjection for free from the App Store or Google Play. Any fees incurred when communicating with the App Store or Google Play are the responsibility of the customer.

  • Page 96: Controlling A Networked Projector Using A Mobile Device

    Epson iProjection (iOS/Android). This lets you access the projector remotely. Make sure you have installed the latest version of Epson iProjection (iOS/Android) on your device (V1.4.0 or later supports this feature). in Epson iProjection to display the menu.

  • Page 97: Using A Usb Key To Connect A Windows Computer

    When you have finished projecting wirelessly, select the Safely Remove Hardware option in the Windows taskbar, and then remove the USB Set up the USB key using Epson iProjection (Windows/Mac) software. key from your computer. See the Epson iProjection Operation Guide (Windows/Mac) for You may need to restart your computer to reactivate your instructions.

  • Page 98: Monitoring And Controlling The Projector

    Monitoring and Controlling the Projector Follow the instructions in these sections to monitor and control the projector over a network. g g Related Links • "Epson Projector Management" p.99 • "Setting Up Projector Network E-Mail Alerts" p.100 • "Setting Up Monitoring Using SNMP"...

  • Page 99: Epson Projector Management

    Epson Projector Management Epson Projector Management software (Windows only) lets you monitor and control your projector through the network. See the Epson Projector Management Operation Guide for instructions. You can download Epson Projector Management from the following Web site. http://www.epson.com/...

  • Page 100: Setting Up Projector Network E-Mail Alerts

    Set the Mail Notification setting to On. • The email address set in From as the mail sender • Epson Projector in the subject line Enter the IP address for the SMTP Server option. • The name of the projector experiencing a problem •...

  • Page 101: Setting Up Monitoring Using Snmp

    Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Enter the SNMP Community Name up to 32 alphanumeric characters Protocol) software on network computers so they can monitor projectors. If long. your network uses this software, you can set up the projector for SNMP monitoring.

  • Page 102: Using Esc/Vp21 Commands

    Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit. ESC/VP21 Command List Contact Epson for more details. When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned Cable Layouts on, a colon ":"...
  • Page 103 Using ESC/VP21 Commands Signal name Function Signal wire ground Transmit data Receive data Communications protocol • Default baud rate setting: 9600 bps • Data length: 8 bit • Parity: None • Stop-bit: 1 bit • Flow control: None...

  • Page 104: Pjlink Support

    Information System Industries Association) as a standard protocol for • Model name displayed for "Product name information query" controlling network-compatible projector's as part of their efforts to • EPSON HCLS100/LS100 standardize projector control protocols. The projector complies with the PJLink Class2 standard established by the JBMIA.

  • Page 105: Crestron Roomview Support

    RoomView lets you control and monitor your projector using a Web browser. Select Network Configuration and press [Enter]. • You cannot use the Epson Web Control feature or the Message Select the Others menu and press [Enter]. Broadcasting feature in Epson Projector Management when you use Crestron RoomView.

  • Page 106: Crestron Roomview Operation Window

    Crestron RoomView Support Type the projector's IP address into the browser's address box and press g g Related Links the computer's Enter key. • "Crestron RoomView Operation Window" p.106 • "Crestron RoomView Tools Window" p.107 You see this screen: Crestron RoomView Operation Window Settings on the operation window let you control the projector and adjust the projection image.

  • Page 107: Crestron Roomview Tools Window

    Crestron RoomView Support Freeze Images are paused or released. Crestron RoomView Tools Window Contrast Adjusts the difference between light and shade in the Settings on the Tools window let you customize various projector setup images. features. Brightness Adjusts the image brightness. Color Adjusts the color saturation for the images.
  • Page 108 Crestron RoomView Support Enabled (Admin Select to require a password to open the Tools window. Password) New Password Enter the new password when changing the password to open the Tools window. (up to 26 alphanumeric characters) Enter the same password as you entered in New Confirm Password.

  • Page 109: Adjusting The Menu Settings

    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. g g Related Links • "Using the Projector's Menus" p.110 • "Using the Displayed Keyboard" p.111 • "Image Quality Settings - Image Menu" p.112 •...

  • Page 110: Using The Projector's Menus

    Using the Projector's Menus You can use the projector's menus to adjust the settings that control how your Press the up or down arrow button to move through the settings. projector works. The projector displays the menus on the screen. Change the settings using the buttons listed on the bottom of the menu Press the [Menu] button on the control panel or remote control.

  • Page 111: Using The Displayed Keyboard

    Using the Displayed Keyboard You can use the displayed keyboard to enter numbers and characters. Text type Details Symbols ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] Use the arrow buttons on the control panel or remote control to ^ _ ` { | } ~ highlight the number or character you want to enter and press the...

  • Page 112: Image Quality Settings - Image Menu

    Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the Setting Options Description input source you are currently using. The available settings depend on the Color Temp. Color Temp.: sets the color temperature currently selected input source.

  • Page 113: Image Quality Settings - Image Menu

    Image Quality Settings - Image Menu Setting Options Description Dynamic Contrast Adjusts the projected luminance based on the image brightness. Normal High Speed Resets all adjustment values except Color Reset — Mode on the Image menu to their default settings. •...

  • Page 114: Input Signal Settings - Signal Menu

    Input Signal Settings - Signal Menu Normally the projector automatically detects and optimizes the input signal Setting Options Description settings. If you need to customize the settings, you can use the Signal menu. Aspect See the list of Sets the aspect ratio (width-to-height The available settings depend on the currently selected input source.

  • Page 115: Input Signal Settings - Signal Menu

    Input Signal Settings - Signal Menu Setting Options Description Video Signal Video Signal: specifies the signal type from the input sources connected to the video ports. If interference appears or no image appears when set to Auto, select the appropriate signal according to the connected equipment.

  • Page 116: Projector Feature Settings - Settings Menu

    Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Split Screen Screen Size Divides the viewing area horizontally and displays two images side-by-side (press Source [Esc] to cancel split screen display). Swap Screens Audio Source Align...
  • Page 117 Projector Feature Settings - Settings Menu Setting Options Description Setting Options Description Power On Link Power On Link: controls what happens User Button Light Source Mode Assigns a menu option to the [User] when you turn on the projector or button on the remote control for one- Info connected device.

  • Page 118: Projector Feature Settings - Settings Menu

    Projector Feature Settings - Settings Menu Setting Options Description Reset — Resets all adjustment values on the Settings menu to their default settings, except for the following: • Zoom • Image Shift • Audio Out Device • Power On Link •...

  • Page 119: Projector Setup Settings - Extended Menu

    Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup Setting Options Description features. Startup Screen Startup Screen: set to On to display a logo when the projector starts up. Color Uniformity: set to On to adjust Color Uniformity the color tone balance for the whole screen.

  • Page 120: Projector Setup Settings - Extended Menu

    Projector Setup Settings - Extended Menu Setting Options Description Setting Options Description Auto Power On Auto Power On: select the image source HDMI1 Audio HDMI1 Audio Output/HDMI2 Audio Output/HDMI3 Audio Output: selects from which you want to automatically Output start projection. When the projector the audio input port when projecting HDMI2 Audio detects the input signal from the selected...

  • Page 121: Projector Network Settings - Network Menu

    Subnet Mask Gateway Address MAC Address Display the QR — Displays a QR code for connecting with Code iOS or Android devices using the Epson iProjection app. Network To additional Configures your network settings. Configuration network menus g g Related Links •...

  • Page 122: Network Menu - Wireless Lan Menu

    You must enter the random keyword displayed from a computer using Epson iProjection to access the projector and share the current screen. Display Keyword Set to On to display a projector keyword on the projected image when accessing the projector using Epson iProjection.
  • Page 123 Projector Network Settings - Network Menu Network > Network Configuration > Wireless LAN Setting Options Description Security Selects the type of security used on the wireless network. When setting security, follow the instructions from the administrator of the network system you want to connect Open Open: security is not set.

  • Page 124: Network Menu - Wired Lan Menu

    Projector Network Settings - Network Menu Network > Network Configuration > Wired LAN Setting Options Description IP Settings DHCP DHCP: set to On if your network assigns addresses automatically; set to Off to IP Address manually enter the network's IP Subnet Mask Address, Subnet Mask, and Gateway Gateway Address...

  • Page 125: Network Menu - Notifications Menu

    Projector Network Settings - Network Menu Network Menu - Notifications Menu Setting Options Description SNMP Set to On to monitor the projector using Settings on the Notifications menu let you receive an email notification if a SNMP. To monitor the projector, you need to install the SNMP manager problem or warning occurs in the projector.

  • Page 126: Network Menu - Reset Menu

    RoomView controlling the projector over the network using Crestron RoomView. Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the Epson Projector Management software. Control4 SDDP Set to On to allow device information to be acquired using Control4 Simple Device Discovery Protocol (SDDP).

  • Page 127: Projector Setup Settings - Eco Menu

    Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save Setting Options Description power. Sleep Mode Automatically turns off the projector When you select a power-saving setting, a leaf icon appears next to the menu after an interval of inactivity (when On).

  • Page 128: Projector Information Display - Info Menu

    Projector Information Display - Info Menu You can display information about the projector and version by viewing the Info Menu - Projector Info Menu Info menu. However, you cannot change any settings in the menu. You can display information about the projector and input sources by viewing the Projector Info menu in the projector's Info menu.

  • Page 129: Event Id Code List

    Network > Network Configuration > Wired LAN > IP Settings If you cannot resolve the problem, contact your network administrator or > DHCP Epson for technical support. 0899 Other communication errors. Event ID Cause and solution...

  • Page 130: Info Menu - Light Source Info Menu

    Projector Information Display - Info Menu Info Menu - Light Source Info Menu You can display the projector's light source information by viewing the Light Source Info menu in the projector's Info menu. Information item Description Light Source Hours Displays the number of operating hours for each of the projector's Light Source Mode settings.

  • Page 131: Projector Reset Options - Reset Menu

    Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu. You cannot reset the following settings using the Reset All option: • Input Signal •...

  • Page 132: Maintaining The Projector

    Maintaining the Projector Follow the instructions in these sections to maintain your projector. g g Related Links • "Projector Maintenance" p.133 • "Cleaning the Projection Window" p.134 • "Cleaning the Obstacle Sensor" p.135 • "Cleaning the Projector Case" p.136 • "Air Filter and Vent Maintenance" p.137 •...

  • Page 133: Projector Maintenance

    The only parts you should replace are the air filter and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning Before cleaning any part of the projector, turn it off and unplug the power cord.

  • Page 134: Cleaning The Projection Window

    Cleaning the Projection Window Clean the projection window periodically, or whenever you notice dust or smudges on the surface. To remove dust or smudges, gently wipe the projection window with lens-cleaning paper. Warning Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector may cause a fire.

  • Page 135: Cleaning The Obstacle Sensor

    Cleaning the Obstacle Sensor Clean the projector's obstacle sensor glass periodically, or if you see a message telling you to remove any obstacles that are interfering with the projection area. To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

  • Page 136: Cleaning The Projector Case

    Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord. • To remove dust or dirt, use a soft, dry, lint-free cloth. • To remove stubborn dirt, use a soft cloth moistened with water and mild soap.

  • Page 137: Air Filter And Vent Maintenance

    Attention If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector.
  • Page 138 Air Filter and Vent Maintenance Pull the air filter out of the projector. Attention Do not use excessive force when tapping the air filter, or it may crack and become unusable. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.

  • Page 139: Replacing The Air Filter

    Air Filter and Vent Maintenance Replace the air filter in the projector as shown and push gently until it Slide the air filter cover latch and open the air filter cover. clicks into place. Close the air filter cover. Replacing the Air Filter You need to replace the air filter in the following situations: •...

  • Page 140: Air Filter And Vent Maintenance

    Air Filter and Vent Maintenance Pull the air filter out of the projector. Place the new air filter in the projector as shown and push gently until it clicks into place. Dispose of used air filters according to local regulations. Close the air filter cover.

  • Page 141: Replacing The Remote Control Batteries

    Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the Warning batteries as soon as they run out. Check the positions of the (+) and (–) marks inside the battery holder to Attention ensure the batteries are inserted the correct way.

  • Page 142: Solving Problems

    Solving Problems Check the solutions in these sections if you have any problems using the projector. g g Related Links • "Projection Problems" p.143 • "Projector Indicator Status" p.144 • "Using the Projector Help Displays" p.146 • "Solving Image or Sound Problems" p.147 •...

  • Page 143: Projection Problems

    • The indicators on the projector may indicate the problem. • The projector's Help system can display information about common problems. • The solutions in this manual can help you solve many problems. If none of these solutions help, contact Epson for technical support.

  • Page 144: Projector Indicator Status

    Power: Lit blue Normal operation. • If the indicators display a pattern not listed in the table below, turn Status: Lit blue the projector off, unplug it, and contact Epson for help. Laser: Off Temp: Off Power: Lit blue Warming up or shutting down. When warming up, wait about 30 seconds for an image to appear.
  • Page 145 Epson for help. Laser: Lit orange Power: Flashing blue Laser warning. Temp: Lit orange Status: Indicator status Turn the projector off, unplug it, and contact Epson for varies help. g g Related Links Laser: Flashing orange • "Cleaning the Air Filter"...

  • Page 146: Using The Projector Help Displays

    Using the Projector Help Displays You can display information to help you solve common problems using the The Help menu is displayed. projector's Help system. Use the up and down arrow buttons to highlight the problem you want Turn on the projector. to solve.

  • Page 147: Solving Image Or Sound Problems

    • Press the [USB] button on the remote control. • Check the settings on the projector's Signal menu to make sure they are • Make sure the Epson USB Display software has been installed correctly. correct for the current video source.

  • Page 148: Solutions When "No Signal" Message Appears

    • Turn off the Transfer layered window setting in the Epson USB Display Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD.

  • Page 149: Solutions When "Not Supported" Message Appears

    Solving Image or Sound Problems Open the System Preferences utility and select Displays. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for Select the Display or Color LCD option, if necessary. details.) •...

  • Page 150: Solutions When The Image Contains Noise Or Static

    • "Cleaning the Projection Window" p.134 • If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer. Solutions When the Image Brightness or Colors are...

  • Page 151: Solutions To Sound Problems

    • If you are using the USB Display function, turn on the Output audio from the projector's Signal menu, if available for your image source. the projector setting in the Epson USB Display Settings program on your Signal > Advanced > Input Signal computer.

  • Page 152: Solutions When Image File Names Are Not Displayed Correctly In Pc Free

    Solving Image or Sound Problems Solutions When Image File Names are not Displayed Correctly in PC Free If any file names are longer than the display area or include unsupported symbols, the file names are shortened or changed in PC Free. Shorten or change the file name.

  • Page 153: Solving Projector Or Remote Control Operation Problems

    • If the power button on the remote control does not turn on the projector, • If you lose the remote control, you can order another one from Epson. check its batteries and make sure at least one of the remote receivers are available in the Remote Receiver setting in the projector's Settings menu.

  • Page 154: Solutions To Password Problems

    Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson for help. Provide the request code and proof of ownership for assistance in unlocking the projector.

  • Page 155: Solving Network Problems

    Solving Network Problems Check the solutions in these sections if you have problems using the projector • Check for any obstacles between the access point, the computer, the mobile on a network. device, and the projector, and change their positions to improve communication.

  • Page 156: Solving Hdmi Link Problems

    Solving HDMI Link Problems Check the solutions in these sections if you have problems using the HDMI Link features. g g Related Links • "Solutions When HDMI Link Does not Function" p.156 Solutions When HDMI Link Does not Function If you cannot operate the connected devices using the HDMI Link features, try the following solutions: •...

  • Page 157: Appendix

    Appendix Check these sections for the technical specifications and important notices about your projector. g g Related Links • "Optional Accessories and Replacement Parts" p.158 • "Screen Size and Projection Distance" p.159 • "Supported Monitor Display Resolutions" p.161 • "Projector Specifications" p.163 •...

  • Page 158: Optional Accessories And Replacement Parts

    Optional Accessories and Replacement Parts The following optional accessories and replacement parts are available. Please External Devices purchase these products as and when needed. The following list of optional accessories and replacement parts is current as External Speaker ELPSP02 of: July 2017. External self‑powered speaker.

  • Page 159: Screen Size And Projection Distance

    Screen Size and Projection Distance Check the table here to determine how far to place the projector from the 16:10 screen size screen based on the size of the projected image. Minimum (Wide) to Minimum Minimum Maximum (Tele) (Wide) (Wide) 120"...
  • Page 160 Screen Size and Projection Distance 16:9 screen size Minimum (Wide) to Minimum Minimum Maximum (Tele) (Wide) (Wide) 126" 279 × 157 77.8 * 38.3 195.3 * Project using Wide (maximum zoom).

  • Page 161: Supported Monitor Display Resolutions

    Supported Monitor Display Resolutions The table here lists the compatible refresh rate and resolution for each Signal Refresh rate (Hz) Resolution (dots) compatible video display format. SDTV (576i/576p) 720 × 576 Component Signals (Analog RGB) HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 ×...
  • Page 162 Supported Monitor Display Resolutions Signal Refresh rate (Hz) Resolution (dots) SDTV (576i/576p) 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 MHL Input Signal Signal Refresh rate (Hz) Resolution (dots) 640 ×...

  • Page 163: Projector Specifications

    Projector Specifications Product name EH‑LS100 Storage temperature -10 to +60°C (No condensation) Dimensions 494 (W) × 172 (H) × 437 (D) mm (not including raised Mass Approx. 11.0kg section) LCD panel size 0.67" * Approximate time until the light source brightness decreases to half of its original value.

  • Page 164: Connector Specifications

    Connector Specifications Computer port Mini D-Sub15-pin (female) Monitor Out port Mini D-Sub15-pin (female) Video port RCA pin jack Audio ports Stereo mini pin jack Audio Out port Stereo mini pin jack HDMI1/MHL port HDMI (Audio is only supported by PCM) HDMI2 port HDMI (Audio is only supported by PCM)

  • Page 165: External Dimensions

    External Dimensions Center of the projection window The unit in these illustrations is mm.

  • Page 166: Usb Display System Requirements

    USB Display System Requirements To use the projector's Epson USB Display software, your computer must meet Requirement Windows the following system requirements. Memory 2GB or more (4GB or more recommended) Requirement Windows Hard disk space 20 MB or more Operating system Windows Vista...

  • Page 167: List Of Safety Symbols (Corresponding To Iec60950-1 A2)

    List of Safety Symbols (corresponding to IEC60950-1 A2) The following table lists the meaning of the safety symbols labeled on the No. Symbol mark Approved Description equipment. standards — The same as No.8. No. Symbol mark Approved Description standards IEC60417 Battery, general IEC60417 "ON"...
  • Page 168 List of Safety Symbols (corresponding to IEC60950-1 A2) No. Symbol mark Approved Description standards IEC60417 Class II equipment No.5172 To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. ISO 3864 General prohibition To identify actions or operations that are prohibited.

  • Page 169: Laser Safety Information

    Laser Safety Information This projector is a Class 1 laser product that complies with the IEC/EN60825- Laser Warning Labels 1:2014 international standard for lasers. Follow these safety instructions when using the projector. Laser warning labels are attached on the projector. Warning Inside •...
  • Page 170 Laser Safety Information This projector is a Class 3R laser product that complies with the Complies with FDA performance standards for laser products except for IEC/EN60825-1:2007 international standard for lasers. Follow these safety deviations pursuant to Laser Notice No. 50, dated June 24, 2007. instructions when using the projector.

  • Page 171: Glossary

    HDCP technology. equipment. However, the projector may not be able to project images Epson have implemented this protocol technology, and have protected with updated or revised versions of HDCP provided a setting to enable the protocol function (ON).
  • Page 172 Glossary Progressive Projects information to create one screen at a time, displaying Sync. The signals output from computers have a specific frequency. the image for one frame. If the projector frequency does not match this frequency, the Even though the number of scan lines is the same, the amount resulting images are not of a good quality.

  • Page 173: Notices

    • Consult the dealer or an experienced radio/TV technician for help. CPU Boards and Power Supplies used with Class B Personal Computers WARNING We: Epson America, Inc. The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device...

  • Page 174: Indication Of The Manufacturer And The Importer In Accordance With Requirements Of Eu Directive

    EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their functional/precision devices etc, you should use this product only after giving logos are registered trademarks or trademarks of Seiko Epson Corporation.
  • Page 175 RSA Security Inc. in the United States and/or other countries. Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Copyright Notice All rights reserved.

Table of Contents