Solutions When The Image Is Flipped Or Too Small; Solutions When The Image Is Fuzzy Or Blurry - Epson EH-LS650B User Manual

• Not connected to an extension cable
• Adjust the Noise Reduction setting in the projector's Picture menu.
• Select a computer video resolution and refresh rate that are compatible with the projector.
• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting in
the Picture menu to improve image quality.
• Make sure you selected the correct EDID setting in the projector's Picture menu.
• If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
Parent topic:
Related references
Image Quality Settings - Picture Menu
Supported Video Display Formats

Solutions When the Image is Flipped or Too Small

If the projected image is flipped or too small, try the following solutions:
• If you flipped the projected image using the Reverse Flip Picture function, press the
Flexible Picture menu button on the remote control to display the Flexible Picture menu, and then
press the
• If you adjusted the size of the projected image, press the
remote control to display the Flexible Picture menu, and then press the
the projected image is the right size.
• Make sure the projection orientation is correct in the projector's Settings menu.
Parent topic:

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus using the focus lever.
• Clean the projection window.
Note: To avoid condensation on the projection window after bringing the projector in from a cold
environment, let the projector warm up to room temperature before using it.
• Position the projector close enough to the screen.
Solving Image or Sound Problems
Flexible Picture menu button again to disable the function.
Solving Image or Sound Problems
Flexible Picture menu button on the
101
brightness up button until