During Operation; Starting The Machine; Using The Self-Propel Drive - Toro 21864 Operator's Manual

During Operation

Starting the Machine

1. Ensure that the battery pack is installed in the machine; refer to
2. Insert the electric-start button into the electric-starter switch (A of
3. Squeeze the blade-control bar and hold it to the handle (B of
4. Press the electric-start button and keep it pressed until the motor starts (C of

Using the Self-Propel Drive

Simply walk with your hands on the upper handle and your elbows at your sides, and the machine will
automatically keep pace with you
Note:
If the machine does not freely roll backward after self-propelling, stop walking, hold your hands in place,
and allow the machine to roll a couple of centimeters (inches) forward to disengage the wheel drive. You can
also try reaching just under the upper handle to the metal handle and pushing the machine forward a couple of
centimeters (inches). If the machine still does not roll backward easily, contact an Authorized Service Dealer.
Figure 9
(Figure 10).
Figure 10
13
Installing the Battery Pack (page
Figure 9).
Figure 9).
Figure
11).
9).
g335467
g334136