Assembly Steps - World Market 437522 Assembly Instructions Manual

Assembly Steps

Step 1
TOP
Place Top Frame (A) on non-marring surface.
Pull Drawer out and press on the plastic drawer stop to completely remove Drawer.
Step 2
(H-2) Bolt x 2
(H-5) Flat Washer x 2
(H-6) Nut x 2
(T-2) Wrench
Insert Bolt (H-2) into the pre-drilled hole in the Leg (B). Secure with Flat Washer (H-5) and a Nut (H-6) using the
provided Wrench (T-2), stacking the hardware in the order as shown. DO NOT OVER TIGHTEN. Repeat for
remaining Leg (B) assembly.
A
B
FRONT
H-2
H-5
T-2
x2
H-6
PAGE 5