Parts List Label Picture Description SOFA BASE ARMREST PILLOW MIDDLE LEG PLASTIC PAD Page 2...
Page 3
Parts List Label Picture Description ALLEN BOLT M8 ×50 MM BOLT M8 ×60 MM SEMI CIRCLE NUT WING NUT ALLEN WRENCH FLAT WASHER SPRING WASHER Page 3...
Page 5
Insert bolts(H-2) into two bottom holes of each armrest(B) and tighten. Page 5...
Page 6
Step 2 Align and insert the installed bolts in armrest(B)with the corresponding holes in the sofa base(A). Page 6...
Page 7
Step 3 Use semi circle nut(H-3) and wing nut(H-4) to fasten bolts to attach armrest(B) to sofa base(A). Repeat for other armrest. Page 7...
Page 8
Step 4 Insert flatwasher(H-6)and spring washer(H-7) and allen bolt(H-1) into top predrilled holes of sofa basa(A) and armrest lightly tighen. When both bolts are inserted, fully tighten with allen wrench(H-5). Repeat for other side. Page 8...
Page 9
Step 5 Line up hole in plastic pad(F) with predrilled holes on bottom of sofa base. Insert legs(D) into each corner over plastic pad(F) and turn clockwise to fully tighten. Place middle leg(E) into center hole over plastic pad(F) and turn clockwise to fully tighten. Page 9...
Page 10
Step 6 :Sofa to sofa bed Pull the velcro strip from the bottom edge to loosen the flap. Raise the seat deck, reattach the velcro to the bottom of the seat as shown. Continue to push the seat deck back until it clicks. Then lay down the seat deck flat for sleep position.
Page 11
Step 7 :Sofa bed to sofa To put the sofa back in seating position, raise the seat deck, pull the velcro away from the bottom of seat, continue to push back until it clicks then push down on the seat deck until flat to the frame, keeping the velcro on the outside of the sofa.
Need help?
Do you have a question about the NOLEE SOFA and is the answer not in the manual?
Questions and answers