StarBoard Link EZ2
3.2 Electronic Pen Input and Finger Input
You can select the following input methods for use with StarBoard Link EZ2.
Input Method
Finger and electronic pen (automatic switching)
(Note: Initial setting)
Finger and electronic pen (manual switching)
Finger
Electronic Pen
3.2.1 Switching Input Methods (Windows)
[1] In the StarBoard Software toolbar, select "MENU" → "Settings" → "StarBoard" → "StarBoard
Settings", and then press "Configure pen buttons...".
Input Condition
When the projection area is touched with the
electronic pen, input switches to electronic pen input.
In pen input mode, if the projection area is touched for
a short length of time using your finger, input
switches to finger input.
The finger/pen switching buttons are displayed at the
left and right edges of the screen.
Electronic pen input
Finger input
Input can only be performed by finger. If the
electronic pen is used, it is used in the same way as a
finger.
Input is only performed using the electronic pen.
Finger input cannot be performed.
3-4
How to use
English