Download
Share
Print this page
Hitachi StarBoard FX Series Setup Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Whiteboard
  5. StarBoard FX Series
  6. Setup manual

Hitachi StarBoard FX Series Setup Manual

Hide thumbs Also See for StarBoard FX Series:

Advertisement

Quick Links

Download this manual
StarBoard FX/FX-DUO Wireless Connection Setup Manual
1. Preface
To establish the wireless connection between StarBoard FX/FX-DUO and the PC, the
following devices are necessary:
Wireless USB Device Server:
USB2.0 WiFi Adapter:
StarBoard Software 9.2 or higher is necessary prior to setup of the wireless connection.
Make sure to select "FX/FX-DUO" in the Board Type screen during the installation of
StarBoard Software.
Installation of GW-US54Mini2W driver
- Log on as Administrator to install.
- Do not plug the USB2.0 WiFi Adapter into the computer until 4(3).
- Disable the firewall on Windows Vista and commercial security software during installation.
2. GW-US54Mini2W Setup
(1) Run the installer of GW-US54Mini2W. If the menu is not displayed automatically,
double-click on " GW-US542090319.exe" in the CD-ROM root.
(2) If the User Account Control window is shown, select "Yes".
All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
silex technology SX-2000WG+
Planex GW-US54Mini2W
(Windows 7)
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the StarBoard FX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hitachi StarBoard FX Series

Summary of Contents for Hitachi StarBoard FX Series

  • Page 1 (1) Run the installer of GW-US54Mini2W. If the menu is not displayed automatically, double-click on ” GW-US542090319.exe” in the CD-ROM root. (2) If the User Account Control window is shown, select “Yes”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 2 (3) Select “I accept the …..” and Select “Next”. (4) Select “Install driver and WLAN Utility” and Select “Next”.. (5) Select “Install”. Installation is performed. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 3 (6) If the “Planex Wireless Utility” window is shown, click “x” button to close the window by force. (7) Select “Finish”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 4 (2) Reset SX-2000WG+ as shown below (a) Hold pressing the reset button (b) Plug the power cable (c) Hold pressing the button until the LED turns red, then release the button All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 5 AUTORUN.EXE”. If the menu is not displayed automatically, double-click on “Autorun” in the CD-ROM root. (5) If the “Security Warning” window is shown, select “Run”. (This window may not be shown foreground.) All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 6 (6) Select ”Device Server Setup”. (7) If the “User Account Control” window is shown, select “yes”. (8) Select ”Yes”. (9) Select “Next”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 7 ２．If still not listed, please disconnect and connect the network cable, and restart the device Server (Disconnect and connect the power cable). Please wait 2 minutes to configurate wireless connection. ３．If still not listed, please go back to Step (a)-(c) in Section 3(2) All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 8 If the same parameters are used for other network, use a different subnet address such as 192.168.1.1. If you are not sure, please ask the network administrator. (13) Select “SSID:GROUP” “Channel:11” and select “Detailed Config”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 9 If you install multiple device servers in a close range, please assign unique SSID for each device server. For example, use the room name and so on. (15) Select “Execute”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 10 (In case that same window shown twice, select “Run” in either case.) (This window may not be shown foreground) (18) Click on “English” and select “Next”. Skip to (19) if the window is not appear. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 11 (19) Select ”Next”. (20) Select “Yes”. (21) Select “Next”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 12 (22) Select “Next”. (23) Select “Start”. (24) Select “Install”. Installation is performed. (This window may not be shown foreground.) All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 13 (25) Select ”Yes”. (26) Select “Do not ……” and select “Next”. (27) Select “Finish” and finish the installation. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 14 (28) Select “Cancel”. (This window may not be shown foreground.) (29) Select “Quit”. (30) Select “Yes”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 15 (b) Disconnect and connect the power cable (2) Please check if the top LED is blinking green. Please refer to Trouble Shooting 7(2) (3) Plug GW-US54Mini2W into the PC. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 16 (4) Run “Start” “Control Panel”, and select “View network status and tasks”. (“Network and Sharing Center”) (5) Select “Manage wireless networks”. (6) Select “Adapter properties”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 17 If you did not use the default parameters for SX-2000WG+, please use the relevant Select “OK” and close all windows. parameters. If you are not sure, please ask the network administrator. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 18 (10) Right click the Planex GW-US54Mini2W icon on the task tray. If window does not appear, run “Start” ”All Programs” ” Planex Wireless” ” Planex  Wireless Utility”. (11) Select the “Launch Config Utility” on the right click menu. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 19 (12) Select “Room1”(SSID) and select “Add to Profile”. If you cannot find the entry, select “Rescan” or reboot SX-2000WG+. (13) Select “System Config” and input the default parameters. Profile Name: ROOM1 SSID: Room1 Network Type: Adhoc All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 20 (14) Select “Auth. \ Encry.” and input the default parameters shown below and select “OK”. Encryption: NONE (15) Select “ROOM1”(SSID) and select “Activate”. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 21 →”All Programs”→”SX Virtual Link”→”SX Virtual Link”. If window does not appear, click the icon below in the task tray. (31) Select “Run”. (This window may not be shown foreground.) (3) Click button below. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 22 If SX-2000WG+ is not listed in the window, please refer to Trouble Shooting 7(2) to make sure the device server is working and the connection is established. If the ping command does not work properly, please check the settings of SX-2000WG+ and GW-US54Mini2W. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 23 FX-DUO (7) Run “Start” →”All Programs”→” StarBoard Software”→” StarBoard Software”. You can see if FX/FX-DUO-DUO is connected by the task tray icon. not connected connected FX-DUO not connected connected All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 24 (2) Click on the USB device entry listed in the window and select button below. FX-DUO (3) You can see if FX/FX-DUO is connected by the task tray icon. not connected connected FX-DUO not connected connected All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 25 If the LED is not still blinking green, please go back to Section 3 and set up again. If still not, the unit might be faulty and contact the support for SX-2000WG+. Please refer to “Device Server Setup CD” for support center information. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 26 “0% loss” is displayed Network Connection Established ping 192.168.0.1 “100% loss” is displayed Network Connection Not Established. After trying all the trouble shooting, please contact the support for SX-2000WG+. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 27 (d) If still not have troubles, please restart the SX-2000WG+ (Disconnect and connect the power cable). Please wait 2 minutes to configurate wireless connection. Then follow to section 6 to reconnect. (e) If still not work correctly, reboot PC. All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
  • Page 28 (c) Select “Yes”. (d) Installation wizard window will be appeared, then select “”Yes, I want to ….” and “Finish”. (e) Follow section 2 “GW-US54Mini2W Setup” to setup. -end of file- All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.

This manual is also suitable for:

Starboard fx-duo seriesStarboard fx-duo-88wStarboard fx-trio-88w