Connect the display board to the main control
●
board, up to four wires are required to connect.
NOTICE
NOTICE
The corresponding colors or corresponding
pins are connected each other.
display panel
(white 10-core)
hoisting grille
(red 5-core)
when connection is completed, please clip
the wires to the buckle.
Install the control box cover and turn the
●
circuit breaker to ON, then close the two plastic
covers on both sides of the panel.
Re-install the air grille by pushing the latchto
●
lock it and xing the two screws, then close the
two screw covers.
Step 3 Optinal parts installation
Wireless module
Wireless module, or named smart kit, if you
choose this con guration, please follow the
steps below to install.
NOTICE
air de ector
If you choose this con guration, it is
(white 5-core)
recommended that installing this wireless
module during the step of panel installation.
Remove the protective cap of the wireless
Wi
●
module (smart kit).
(4 core)
Open the cover with display panel, loosen the
●
screw and remove the cover.
Loosen the screw and remove the cover
Page 45