Table of Contents
Advertisement
JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
●
●
General Requirements
Improper operations on high-voltage equipment may cause an electric shock,
which could result in death, serious injury, or serious property damage. Comply
with the following precautions:
● Observe the operation procedures and safety precautions provided in this
manual and other related documents.
● Observe the safety precautions specified in the warning signs and labels on the
equipment.
● Use correct tools properly as required in this manual.
● Observe the safety regulations of the plant, such as the work ticket mechanism.
● Only personnel who need to work on the equipment are allowed to access the
equipment. Install temporary warning signs or fences before working on the
equipment.
● The warning signs and protection labels on the equipment must be clear and
prominent. Do not alter, damage, or block them. Replace the signs and labels
promptly if damaged.
● Do not perform installation, cable connection, maintenance, or replacement
when the equipment is energized.
● Do not use water to clean electrical components in the equipment.
● When the system is running, do not open the cabinet doors or sealing plates in
the energized area.
● Check the equipment for any damage, such as holes, dents, or other signs of
internal damage.
● Check that the preinstalled cables are securely connected.
● Ensure that the components in the equipment are not displaced. Do not alter
the equipment structure or installation procedures without permission.
● Do not power on the equipment before it is installed or confirmed by
professionals.
● Before touching a conductor surface or terminal, measure the voltage at the
contact point. Ensure that the equipment or components to be repaired are
properly grounded to avoid electric shocks.
● If any liquid is found inside the equipment, immediately press the emergency
stop button and contact the onsite management personnel.
● When you power on the system for the first time or perform operations on the
main loop with power on, wear arc protection clothes.
Issue Draft A
(2022-09-07)
Damage during transportation by the customer due to failure to comply with
transportation requirements
Storage conditions that do not meet the requirements specified in this
document
D ANGER
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
2
Advertisement
Table of Contents
