Huawei JUPITER-3000K-H1 User Manual page 16

JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
●
Safety When Drilling Nearby the Equipment
●
●
●
Moving Heavy Objects
●
●
●
●
●
Issue Draft A
(2022-09-07)
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
– Keep your body steady.
– Do not climb higher than the fourth rung of the ladder from the top.
– Keep your center of gravity between the side rails, and do not overreach
to the sides.
Drill holes at proper positions to ensure that no short circuit is caused.
Wear protective equipment such as safety goggles and protective gloves when
drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings.
When moving heavy objects, ensure that the number of operators must meet
the requirements in the following figure and make proper preparations.
Wear protective gloves and anti-smashing shoes when manually moving the
equipment.
Do not scratch the equipment surface or damage components or cables when
moving the equipment.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
Move the equipment with caution to prevent collision or fall.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
10