Table of Contents
Advertisement
FIXING TO THE SUPPORT STRUCTURE -
FLUSH-MOUNTING MODEL
Important: The following operation must be
carried out by a competent technician.
Installation can be carried out on different
materials such as masonry, metal, solid wood
and plastic laminated wood provided it is heat
resistant (T 90°C).
Make an opening in the cabinet top, of the
dimensions shown in fig. 1; to correctly install the
hob a 2 mm deep milling must also be made in the
top (Fig. 4).
Note: In case of laminated tops less than 2 mm thick, carry out
the milling in the cabinet as shown in the diagram (detail).
Before positioning the hob, apply the adhesive sealing strip
(supplied) on the entire bottom surface that will be in contact
with the top (fig. 2).
Carry out these operations:
• Place the hob on the milling and, using the screws and brackets
supplied, fix it to the support structure, ensuring that it is
perfectly flat (fig. 3).
• Carefully trim the excess sealing strip (fig. 4). In case of
installation on wood (especially chipboard), if there are small
spaces between the milling and the edge of the hob, fill with
minimum amounts of silicone. The bottom part of the casing
must be entirely accessible after installation.
Important:
• Tighten (lightly by hand) the brackets fixing the hob to the
cabinet.
• If the cabinet worktop is in wood or similar, protect the edge
of the milling with a primer before closing with the sealing strip.
Fix the hob with the special brackets supplied.
The supply includes 2 types of brackets:
- 8 of standard length (Service Code 4812 404 49874) for
installation on kitchen tops thicker than 4 cm
- 8 longer than standard (Service Code 4812 404 49875) for
installation on kitchen tops less than 4 cm thick
The brackets must be fixed with the special screws to the front (4)
and the back (4) using the seats on the bottom of the hob (Fig. 3).
Important: The power cable must be long enough to allow the
hob to be removed upwards.
26
1160
+1
1161
0
1148
R. 11
21,5
6,5
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Advertisement
Table of Contents
