Zanussi ZS12V70CCHI Service Manual page 55

Steps Procedure
Front Panel
You should screw off the 3 screws located on the upper, 3 screws
located on the bottom, 2 screws in left side and 2 screws in the right
side on the front panel in order to remove the front panel and reach
the compressor and 4 way valve.
Remove 4 screws connecting the right side plate with the chassis,
the valve support and the electric box. Remove the right side plate.
Control Box
Take the control unit by removing all screws on the control unit and
terminal block.
Remove 4 screws connecting the right side plate with the chassis,
the valve support and the electric box. Remove the right side plate.
55