Disassembly And Reassembly Instructions; Indoor Unit - Zanussi ZS12V70CCHI Service Manual

10. DISASSEMBLY AND REASSEMBLY INSTRUCTIONS

10.1 Indoor Unit

Steps
Visual before disassembly
Removal of filter and horizontal louver
Open the front panel.
Push the filter inward and then draw it upward to remove it.
Remove the center pin of horizontal louver from its slot.
Remove the horizontal louver pin that connected with step motor
shaft by pulling the left side.
Finally, remove the horizontal louver from on the far left.
Removal of front panel and front case
Push up on the front cover by holding the taps on both sides of
indoor unit.
Procedure
50