Setting With Remote Control - Zanussi ZS12V70CCHI Service Manual

9.4 Setting with remote control

OPTION SET MODE
You must follow the steps below to put your remote in setting mode;
1. The batteries should be removed.
2. You must press simultaneously set (+) and set (-) buttons when re-inserting the batteries.
3. When you reinsert the batteries, the remote controller will switch to set mode. ( When the RC switch in this mode, you can not
control the RC standard use mode. )
4. You will see 6 zero icon on the screen.
5. Start entering the setting codes by pressing the buttons shown in the tables.
05
Indoor Unit Set Code
ZS12V70CCHI 053843*112450
ZS12V71CCHI 053843*112450
ZS12V80CCHI 053843*112450
ZS12V81CCHI 053843*112450
ZS12V91CCHI 053843*112450
ZS18V70CCHI 051A33*113350
ZS18V80CCHI 051A33*113350
ZS18V81CCHI 051A33*113350
ZS24V70CCHI 053333*112350
ZS24V71CCHI 053333*112350
ZS24V80CCHI 053333*112350
ZS24V81CCHI 053333*112350
ZS24V91CCHI 053333*112350
For the indoor control unit you supply as spare parts, you must make the
setting adjustments in this table according to each model. If the product
is operated before setting operation, AC does not work and an error code
appears on indoor unit display
NOTE: The leading zero number does not change
49