Product Overview; Specifications; Attachments/Accessories - Toro Greensmaster TriFlex 3300 Series Operator's Manual

Product Overview

Specifications

Traction-Unit Compatibility
Height of Cut
Height-of-Cut Range
Reel Bearings
Rollers
Grass Shield
Counterweight
Net Weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
The dethatching unit mounts on Greensmaster 3300 and 3400 series traction units.
Dethatching depth is adjusted on the front roller by 2 vertical screws and held by 2 locking
cap screws.
Bench HOC range is 4.78 mm (0.188 inch) below ground level to 6.35 mm (0.250 inch)
above ground level.
Two sealed stainless steel, deep groove ball bearings.
The rear roller is a 5.1 cm (2 inch) diameter steel full roller.
Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in
wet conditions.
A cast iron weight mounted opposite to the drive motor balances the dethatching unit.
33 kg (73 lb)
for a list of all
7