Installing The Dethatching Unit; Installing The Electrical Counterweight - Toro Greensmaster TriFlex 3300 Series Operator's Manual

6. Tighten both height-of-cut knob locknuts.
4
Installing the Dethatching
Unit
No Parts Required
Procedure
See the traction unit Operator's Manual for instructions
to install the dethatching unit to the machine.
Important:
If you set the dethatching unit at a
negative setting, prevent contact with concrete
floors or paved surfaces. Contact with these
surfaces can damage the dethatching-unit blades.
5
Installing the Electrical
Counterweight
No Parts Required
Procedure
Note:
If the dethatching unit is installed on a machine
with electric reel motors, you must install an additional
electrical counterweight to the existing counterweight.
Secure the electrical counterweight to the existing
counterweight with 2 cap screws as shown in
1. Cap screw
2. Electrical counterweight
6
Figure
Figure 5
3. Existing counterweight
5.
g036342