Lcd Monitor Operation - Sharp PN-ZB03W Operation Manual

LCD monitor operation

n Wireless settings
You can change the settings below in "COMMUNICATION SETTING" of the SETUP menu. Depending on the monitor, some
menu items may not appear.
WIRELESS SETTING
WIRELESS FUNCTION .................... Set whether or not the wireless board's wireless LAN is used.
CONNECT AUTO INPUT SELECT ... Set whether or not the input mode automatically changes to OPTION when a video
n Change the monitor to OPTION mode
To use the wireless board, change the input mode to OPTION. The home screen of Wireless mode appears.
TIPS
• When the power is in the off state, the wireless LAN access point function of the wireless board cannot be used.
• Even if LOGO SCREEN is set to OFF in the OTHERS menu, the "MirrorOp" logo is displayed when the OPTION input mode
changes.
• The following functions cannot be set in the Wireless Board.
HDMI AUTO VIEW, HOT PLUG CONTROL
• When you first display the home screen after installing the wireless board, the wireless board may restart.
8
E
Even when this is set to OFF, the LAN terminal of the wireless board can be used.
* When the setting is changed, the monitor restarts.
signal is input via the wireless board.
* Some icons do not appear on models that are not touch-applicable. (See page 15.)
SSID (Host Name) IP Address Passcode