Sharp PN-ZB03W Operation Manual page 4

n Conference control mode
• A conference admin can be designated to manage which computer screens are displayed. (See page 22.)
n WebSlides
• The screen that is displayed in Wireless mode appears in the web browser of the computer that is connected to the wireless
board. (See page 23.)
Caution
• To keep the performance of the wireless board stable, put the monitor in the Power off (Standby mode) state once a day.
TIPS
• You can connect up to 10 devices to the wireless board.
• The wireless LAN communication range is about 10 m.
In the following cases, the communication speed may slow down or communication may not be possible.
- An obstacle is present
- Interference occurs with another wireless device using the same frequency
- Electromagnetic interference occurs due to the magnetic field or static electricity of a microwave oven or other device
- When the transmission speed is slow,
• The monitor may reboot due to external load noise, static electricity, or other factors. This will break the wireless connection
between the wireless board and computer, so in this event, you will need to reestablish the connection.
• The computer screen information is sent to the wireless board and displayed on the monitor.
For this reason, there may be a delay in the display or it may not be possible to display the screen correctly.
Correct operation may not be possible from some applications.
4
E
appears.