Sharp PN-ZB03W Operation Manual page 30

WLAN Setup Wireless LAN Set whether the wireless LAN function is used.
Mode
Access Point
Station
30
E
Access Point: Use the wireless board as an access point.
Station: Use the wireless board as a client.
AP and Station: Use the wireless board as both an access point and a client.
Set this when the "Mode" is "Access Point" or "AP and Station".
SSID
Set the SSID of the wireless board.
SSID Broadcast
Set whether SSID broadcast is used.
Band
Set the frequency bands used for wireless LAN.
* 2.4 GHz and 5 GHz cannot be used simultaneously.
* When 5 GHz is selected, 2.4 GHz devices will not be able to connect.
802.11mode
Change the communication frequency bands and the communication speed.
Channel
Set the channels that are used for wireless LAN.
Encryption
Set the encryption method for wireless LAN encryption.
Key
Set a key that is appropriate for the wireless LAN encryption method.
Channel Bandwidth
Set the channel bandwidth.
Set this when the "Mode" is "Station" or "AP and Station".
Connect to Existing AP
Enter the SSID of the wireless LAN access point.
Encryption
Set the encryption method for wireless LAN access point.
Key
Set the encryption key that is appropriate for the wireless LAN access point.