Starting From A Commercially Available Usb Flash Drive - Sharp PN-ZB03W Operation Manual

Starting from a commercially available
You can enable starting of the connection software from a commercially available USB flash drive.
USB flash drives that can be used:
• USB flash drives indicated operation manual with a capacity of 128 MB or more.
• Use a USB flash drive in which nothing is saved.
1. Insert the USB flash drive into the USB port of the wireless board.
Touch-applicable models:
2. Touch "Setup" (
3. Touch "Create Token".
Creating starts.
4. When the making completed message appears, remove the USB flash drive.
Other than touch-applicable models:
2. Press INFORMATION button three times on the remote control unit in OPTION input mode to display the
INFORMATION3 screen.
3. Press ENTER button to display CREATE TOKEN screen.
4. Press or to select the OK, and press ENTER button.
Creating starts.
5. When the creating completed message appears, remove the USB flash drive.
Caution
• Do not remove the USB flash drive while making is in progress.
And do not turn off the power of the monitor.
• Always create this on the wireless board.
Incorrect operation will result if you copy the file from the wireless token to the USB flash drive using your computer.
TIPS
• When the USB flash drive connection software is started, the software will automatically connect to the wireless board on
which the wireless token was created. (The software will also connect automatically over wireless LAN.)
32
E
USB flash drive
) in the home screen of Wireless mode.