Advertisement
3
Connecting Cables
Power cable
4
Powering On the Bar 300
Once all cables are connected correctly, connect the Bar 300 to a power supply using the power
adapter. When the power adapter indicator turns on, the Bar 300 will automatically power on.
When the Bar 300 is being powered on or running, manually rotating the
camera PTZ or preventing it from rotating may cause damage.
Rapidly blinking
Blinking green
Indicator
Off
green
Steady green
(twice/second)
(4 times/second)
Powered
Status
Starting
Upgrading
Running
off
Power adapter
Ethernet cable
Ethernet
PoE adapter
cable
Power cable
Ethernet cable
for the Touch
Breathing green
Slowly blinking red
Blinking red
(gradually lighting,
(once/5 seconds)
(twice/5 seconds)
then dimming)
On standby
Hardware error
Overheated
HDMI cable
Wired connection: Connect the Bar 300 using a network cable.
Wi-Fi connection: Connect the Bar 300 using a Wi-Fi network.
For alternative methods of connecting the Touch
to the Bar 300, see Configuring the Endpoint
Using the Touch > Connecting the Touch to
the Endpoint in the Bar 300 Configuration Guide.
5
5
Installing and Using the "Smart Eye" Cover
1
Understand the "smart
eye" cover.
"Smart eye" cover: attracted
with magnetic force
Securing tab: attached using
adhesive
Rapidly blinking
red
"Smart eye" cover
(4 times/second)
Software error
HDMI cable (not included)
HD-AI cable
(included with
the microphone)
2
Attach the adhesive side of the
securing tab to the left side of
the Bar 300. To disable the
"smart eye", attach the "smart
eye" cover on the "smart eye".
Securing tab
3
To enable the "smart eye",
attach the "smart eye"
cover to the securing tab
to prevent the cover from
being lost.
* The Bar 300-C model does not involve the AI function.
Advertisement
