Table of Contents
Advertisement
Changes from Ver. 3.11 to Ver. 3.12
The changes in Platform Version Ver. 3.12 are listed below. The functions and settings listed here may not be available
on some models. For details, see the descriptions in the links in each change.
Changes to Functions(P. 101)
Changes to Settings/Registration(P. 101)
Changes to Functions
●
Renaming of items displayed in the <Home> screen
Changes to the <Home> Screen(P. 17)
●
Renaming of items displayed in the one-touch button registration screen
Changes to Destination Registration(P. 19)
●
Support for specifying domains in IP addresses when configuring Active Directory server authentication
Changes to Server Information Registration(P. 20)
●
Support for using Color Network ScanGear 2 via a sub line
Changes to Networks(P. 21)
●
Support for changing the secondary transfer voltage (the voltage that transfers toner to the paper) for the
registered custom paper
Changes to the Secondary Transfer Voltage (Ver. 3.12-)(P. 27)
●
Change to the number of sheets in the Eco (Staple-Free) mode
Changes to the Eco (Staple-Free) mode (Ver. 3.12-)(P. 31)
●
Process for removing paper jam when the inner finisher is installed added
Changes Related to Clearing Paper Jams(P. 33)
●
Change to specifications (Send functions/Printer functions/Storage space functions/System environment/
Network environment)
Changes to System Specifications(P. 37)
Changes to Settings/Registration
●
<Default Paper Feed Source> added
<Default Paper Feed Source>(Ver. 3.12-)(P. 56)
●
<Pure Black Graphics> added
<Pure Black Graphics>(Ver. 3.12-)(P. 57)
●
<Adj. Lead Edge Sec. Transfer Volt.> and <Correct Tail End Toner Application> added
Changes for Each Version
101
98AE-015
Advertisement
Table of Contents
