■
RS-232C cable
■
USB cable
Note
Disconnect the power cord if abnormalities such as smoke and fire, etc. are
observed. Do not position the monitor so that it is difficult to operate the
disconnection.
5
Connect the DC plug of the supplied AC adapter to the monitor's "DC IN 12 V".
Caution
Use the supplied AC adapter only. When using multiple monitors side by side,
do not pile AC adapters on top of each other. Heat could build up and it
could cause a fire.
Connect the RS-232C cable
BEFORE installing the driver
software.
4
5
6
Connect the USB cable AFTER
installing the driver software.
4
5
6
- 20 -
To the computer's COM port
To the wall outlet
To the computer's USB port
To the wall outlet