Installing The Touch Driver Software - JVC CV532PJ Instruction Manual

Installing the Touch Driver Software

Installing the Touch Driver Software
● Notes for Software drivers
Download the driver from "
Before downloading, carefully read the disclaimer provided on the website.
Make sure that the driver you download is suited for your operation system.
Once downloaded, decompress the file to run the install program.
● Calibration:
- Calibrate the monitor after the whole system including this monitor is completely
installed.
- After the calibration, do not change the resolution and position of the display area.
Calibrate again when they are changed.
- Calibrate again when the system is relocated after the calibration.
- The calibration has to be done right after the touch panel driver is installed.
- The touch point and the cursor may not be consistent before the touch panel is
calibrated.
4 points calibration is the default calibration.
25 points and 9 points calibration are the advance modes.
- These modes should calibrate the touch panel more precisely and the touch panel
could work more accurately.
eGalax_eMPIA Technology Inc. (EETI)"
https://www.eeti.com
- 18 -
website at