Canon Pixma MP495 Series On-Screen Manual page 731

Printing Out Network Setting Information
>
Advanced Guide About Network Communication
Setting Information
N022
Printing Out Network Setting Information
You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the Rear Tray.
3.
Press the Maintenance button repeatedly until the LED displays as follows.
4.
Press the Color button or the Black button.
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Wireless LAN
Link Status
MAC Address
SSID
Connection Mode
Channel
Encryption
WEP Key Length
Authentication
Signal Strength
TCP/IP Version
IP Address
Default Gateway
Subnet Mask*1
Subnet Prefix
Length*2
IPsec*3
Security Protocol*3
WPS PIN CODE
Printer Name
WSD
WSD Timeout
LLTD
>
Changing and Confirming Network Settings
Explanations of the item
Wireless LAN
Status of the Wireless LAN
MAC Address
SSID
Connection Mode
Channel
Method of the Encryption
WEP Key Length
Method of the Authentication
Signal Strength
TCP/IP Version
Selected IP Address
Default Gateway
Subnet Mask
Subnet Prefix Length
IPsec setting
Method of the Security
Protocol
WPS PIN CODE
Printer name
WSD setting
Timeout
LLTD setting
> Printing Out Network
Setting
Enable/Disable
Active/Inactive
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN
Infrastructure
XX (1 to 13)
none/WEP/TKIP/AES
Inactive/128/64
none/auto/open/shared/WPA-PSK/WPA2-
PSK
0 to 100 [%]
IPv4/IPv6
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX
Active
ESP/ESP & AH/AH
XXXXXXXX (Up to 8 characters)
Printer name (Up to 15 characters)
Enable/Disable
1/5/10/15/20 [min]
Enable/Disable
Page 731 of 759 pages