Canon Pixma MP495 Series On-Screen Manual page 23

Saving Scanned Data on the Computer
Do not turn off the power while the machine is operating.
Do not plug in or unplug the USB cable while the machine is scanning originals.
Do not open the Document Cover or move the loaded original until scanning is completed.
Note
The position or size of the original may not be scanned correctly depending on the type of
original.
In this case, refer to the on-screen manual:
Document Type and Document Size of MP Navigator EX to match the original and scan it.
When the program selection screen appears:
The program selection screen may appear after performing step 2.
If the program selection screen appears, select MP Navigator EX Ver4.0 and click OK.
To start MP Navigator EX automatically without displaying the program selection screen, follow
the procedure below.
- For Windows 7 or Windows Vista users, refer to "For Windows Users" in "
of the on-screen manual: Advanced Guide .
- For Windows XP users, select MP Navigator EX Ver4.0 as the software application to be
used in the program selection screen, select Always use this program for this action, then
click OK.
Advanced Guide to change the settings in
Page 23 of 759 pages
Troubleshooting "
Page top