Canon Pixma MP495 Series On-Screen Manual page 502

Starting ScanGear (Scanner Driver)
> >
Advanced Guide Scanning
ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)
S202
Starting ScanGear (Scanner Driver)
Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning.
ScanGear can be started from MP Navigator EX or an application.
Note
To scan via a network connection, start MP Navigator EX and set up the network environment.
Network Scan Settings
Starting from MP Navigator EX
Navigation Mode Screen
Follow these steps to start ScanGear from the Navigation Mode screen of MP Navigator EX.
Start MP Navigator EX and open the Navigation Mode screen.
1.
Starting MP Navigator EX
In Scan/Import, click Photos/Documents (Platen).
2.
The Scan/Import window opens.
Select the Use the scanner driver checkbox, then click Open Scanner Driver.
3.
The ScanGear screen appears.
One-click Mode Screen
Follow these steps to start ScanGear from the One-click Mode screen of MP Navigator EX.
Start MP Navigator EX and open the One-click Mode screen.
1.
Starting MP Navigator EX
Scanning with Other Application Software >
Scanning with Advanced Settings Using
Page 502 of 759 pages