Section 5
Mounting
5.3.3
Wall mounting
5.3.3.1
Overview
All case sizes, 1/2 x 19", 3/4 x 19", and 1/1 x 19", can be wall mounted. It is also possible to mount the
IED on a panel or in a cubicle.
5.3.3.2
Mounting procedure for wall mounting
2
1
IEC13000266 V2 EN-US
Figure 5:
PosNo
1
2
3
Table continues on next page
24
Use only the screws included in the mounting kit when mounting the plates and the angles on
the IED. Screws with wrong dimension may damage the PCBs inside the IED.
If fiber cables are bent too much, the signal can be weakened. Wall mounting is therefore not
recommended for any communication modules with fiber connection.
3
Wall mounting details.
Description
Bushing
Screw
Screw
© 2017 - 2023 Hitachi Energy. All rights reserved
4
5
6
Quantity
4
8
4
1MRK514026-UUS Rev. P
IP10316-1 v1
M11973-3 v7
M11949-2 v4
Type
-
M4x10
M6x12 or
corresponding
670 series
Installation manual