Unpacking, Inspecting And Storing; Removing Transport Packaging; Inspecting The Product; Identifying The Product - Hitachi 670 Series Installation Manual

1MRK514026-UUS Rev. P
Section 4
4.1

Removing transport packaging

IEDs require careful handling.
1. Examine the delivered products to ensure that they have not been damaged during the transport.
2. Remove the transport packing carefully without force.
4.2

Inspecting the product

4.2.1

Identifying the product

1. Locate the IED's order number from the label attached to the IED's case.
2. Compare the IED's order number with the ordering information to verify that the received product is
correct.
4.2.2

Checking delivery items

Check that all items are included in the delivery in accordance with the delivery documents.
4.2.3

Inspecting the IED

• Check the IED to see if any damage occurred during transportation.
4.2.4

Returning an IED damaged in transit

If damage has occurred during transport, appropriate actions must be taken against the latest carrier.
Please inform the nearest Hitachi Energy office or representative. Notify Hitachi Energy immediately if
there are any discrepancies in relation to the delivery documents.
4.3

Storing

If the IED is stored before installation, it must be done in the original transport casing in a dry and dust
free place in accordance with ANSI C37.90.0. Storage temperature must be within the range of -40° C to
+70° C. The average high temperature is recommended to be less than +40° C, to minimize component
ageing.
670 series
Installation manual

Unpacking, inspecting and storing

The cardboard packaging material is 100% recyclable.
© 2017 - 2023 Hitachi Energy. All rights reserved
Section 4
Unpacking, inspecting and storing
AMU0600514 v5
AMU0600513 v5
GUID-2A6D8F5A-470F-40D1-9EAE-60DE4DD85EE6 v1
GUID-F6333353-F05D-4B41-BE44-5CE5274E788E v2
GUID-966A05ED-CD30-4F66-957E-00FF38943A73 v6
GUID-1DC9D33D-DC62-438B-9333-3BB354164CBC v7
17