Disturbance Record Analysis; Disturbance Reports; Ied Self-Supervision; Non-Operative Functions - Hitachi 650 Series Operation Manual

Section 6
IED operation
6.2.2

Disturbance record analysis

The IED collects disturbance records of fault events which are set to trigger the disturbance recorder.
Disturbance data is collected and stored for later viewing and analysis. The disturbance recorder
data can be read and analyzed with PCM600.
6.2.3

Disturbance reports

PCM600 can be used for creating reports of disturbance recorder data.
6.2.4

IED self-supervision

The IED self-supervision handles internal run-time fault situations. The main indication of an internal
fault is a flashing green Ready LED.
Internal faults can be divided to hardware errors, run-time errors in the application or operating
system and communication errors. Further actions always depend on the cause of the error.
The IED records IED status data and events.
6.2.5

Non-operative functions

Protection and control functions can be non-operative if:
• function is not turned on, that is, Operation = Off.
• function is connected to bad or lost input data from MU.
• function is set to a non-operative state by IEC 61850.
Non-operative functions, functions that are blocked due to bad or lost data from MU and functions set
to a non-operative state by IEC 61850 are listed on the LHMI under Main menu/Test/Function
overview.
48
For more information, see the PCM600 documentation.
For more information, see the PCM600 documentation.
Only authorized and skilled personnel should analyze the errors and decide on further
actions.
Document all the recorded data from the IED before resetting the tripping and IED lockout
functions.
© 2017 - 2023 Hitachi Energy. All rights reserved
1MRK500128-UEN Rev. H
GUID-52E4493E-5F8F-44F8-94DE-23A2EBD36AC1 v5
GUID-4191AAA0-EA7E-4C74-9B8E-EC44FC390919 v3
GUID-FFF9F2C4-B04B-40BD-A636-8D430DBA69CF v10
GUID-752CDABC-4F21-4A02-AF77-F8AD0165F1DD v2
650 series
Operation manual