Pcm600 Tool; Connectivity Packages - Hitachi 650 Series Operation Manual

Section 4
Overview
receiving of analog values using GOOSE messaging. Analog GOOSE messaging enables fast
transfer of analog measurement values over the station bus.
The IED interoperates with other IEC 61850 compliant IEDs, tools and systems and simultaneously
reports events to eight different clients on the IEC 61850 station bus. For a system using DNP3 over
TCP/IP, events can be sent to four different masters. For systems using IEC 60870-5-103 IED can be
connected to one master in a station bus with star-topology.
The IED has a number of communication ports which support different protocols:
Communication media
Ethernet (fiber-optic multimode LC connector 100BASE-
FX or 100BASE-TX with connector RJ45)
Optical Serial port (glass with ST connector or plastic
with HFBR snap-in connector)
Optical LON port (glass with ST connector or plastic with
HFBR snap-in connector)
RS485
The IED supports IRIG-B, PPS, SNTP, PTP or Binary time synchronization methods with a time-
stamping resolution of 1 ms or better. Alternative time synchronization methods are LON, SPA, DNP
or IED 60870-5-103.
4.4

PCM600 tool

Protection and Control IED Manager PCM600 offers all the necessary functionality to work
throughout all stages of the IED life cycle.
• Planning
• Engineering
• Commissioning
• Operation and disturbance handling
• Functional analysis
With the individual tool components, you can perform different tasks and functions and control the
whole substation. PCM600 can operate with many different topologies, depending on the customer
needs.
4.4.1

Connectivity packages

A connectivity package is a software component that consists of executable code and data which
enables system tools to communicate with an IED. Connectivity packages are used to create
configuration structures in PCM600. The latest PCM600 and connectivity packages are backward
compatible with older IED versions.
30
When using PCM600 for writing to the IED, ensure that the LHMI is not in a menu
position where settings can be made. Only one active transaction, from LHMI or
PCM600, is allowed at a time.
For more information, see
© 2017 - 2023 Hitachi Energy. All rights reserved
Protocols supported
IEC 61850, FTP, PTP, HSR, PRP, SNTPv4 (RFC2030)
IEC 60870-5-103, DNP3, SPA
LON
IEC 60870-5-103, DNP3
PCM600 documentation.
1MRK500128-UEN Rev. H
AMU0600443 v13
GUID-D480127C-3F19-44A3-9A6F-A8549C02CDCD v2
650 series
Operation manual