Adjusting The Display Contrast; Changing The Local Hmi Language; Navigating In The Menu - Hitachi 650 Series Operation Manual

1MRK500128-UEN Rev. H
1. Select Main menu /Diagnostics /IED Status /Product identifiers .
2.
Select a submenu with
IEC13000238 V1 EN-US
Figure 20:
3.
Enter the submenu with
4.
Browse the information with
5.1.7

Adjusting the display contrast

Adjust the display contrast anywhere in the menu structure to obtain optimal readability.
•
To increase the contrast, press simultaneously
•
To decrease the contrast, press simultaneously
Set the parameter ContrastLevel via Main menu /Configuration /HMI /Screen /SCREEN:1 to
permanently change the display contrast.
5.1.8

Changing the local HMI language

1.
Select Main menu /Language /LANGUAGE:1 and press
2.
Change the language using
3.
Press
4. Commit the changes.
5.1.9

Navigating in the menu

Navigate the menus and change the display views on the screen with the keypad.
650 series
Operation manual
and
Selecting a submenu
.
and
The display contrast is not stored in any memory if changed using the keys from local
HMI. After an auxiliary power failure, the display contrast is restored to set value for
parameter ContrastLevel.
or
to confirm the selection.
© 2017 - 2023 Hitachi Energy. All rights reserved
.
IEC13000238-1-en.vsdx
.
and .
and .
.
Using the HMI
GUID-3DF3CD65-3EC2-41AF-B538-5CDA0C34E804 v9
.
Section 5
AMU0600410 v7
AMU0600412 v7
37