Introduction; This Manual; Intended Audience; Product Documentation - Hitachi 650 Series Operation Manual

1MRK500128-UEN Rev. H
Section 1
1.1

This manual

The operation manual contains instructions on how to operate the IED once it has been
commissioned. The manual provides instructions for the monitoring, controlling and setting of the
IED. The manual also describes how to identify disturbances and how to view calculated and
measured power grid data to determine the cause of a fault.
1.2

Intended audience

This manual addresses the operator, who operates the IED on a daily basis.
The operator must be trained in and have a basic knowledge of how to operate protection equipment.
The manual contains terms and expressions commonly used to describe this kind of equipment.
1.3

Product documentation

1.3.1

Product documentation set

Engineering manual
Installation manual
Commissioning manual
Operation manual
Application manual
Technical manual
Communication
protocol manual
Cyber security
deployment guideline
IEC07000220 V4 EN-US
Figure 1:
The engineering manual contains instructions on how to engineer the IEDs using the various tools
available within the PCM600 software. The manual provides instructions on how to set up a PCM600
650 series
Operation manual

Introduction

The intended use of manuals throughout the product lifecycle
© 2017 - 2023 Hitachi Energy. All rights reserved
Section 1
Introduction
GUID-AB423A30-13C2-46AF-B7FE-A73BB425EB5F v21
GUID-C9B8127F-5748-4BEA-9E4F-CC762FE28A3A v11
GUID-3AA69EA6-F1D8-47C6-A8E6-562F29C67172 v16
IEC07000220-4-en.vsd
5