Polaris RZR XP 4 1000 EPS 2020 Owner's Manual page 69

3. Press the Update maps in the General Settings.
4. Select the file you want to install by pressing the corresponding down arrow
icon.
5. This will update the display's map which will automatically restart the display
once the update is complete. Do not remove the USB flash drive until the
display has fully restarted.
USB HARDWARE
For software update, POLARIS recommends using a SanDisk® or similar USB
flash drive with a minimum of 4G in available memory, formatted using the
FAT32 or EXFAT file systems. For best results remove all files from the flash
drive before starting the update process.
The Ride Command display is compatible with both USB 2.0 and USB 3.0
FEATURES AND CONTROLS
NOTE
flash drive.
67