LUNA2000-100KTL-M1 Smart Power Control System
User Manual
8.3 Alarm Reference
For details about alarms, see the
Power Control System Alarm
8.4 Replacing a Fan
● Before replacing a fan, power off the Smart PCS.
● When replacing a fan, use insulation tools and wear PPE.
Step 1 Remove the screws from the fan tray and store them properly. Pull out the fan
tray until it is flush with the Smart PCS.
Figure 8-4 Pulling out fan tray (1)
Step 2 Remove the cable ties shared by the cables, unscrew the connectors, and
disconnect the cables.
Figure 8-5 Disconnecting cables
Issue 07 (2023-07-15)
CA UTION
NO TE
If the fan gets stuck when being pulled or pushed, slightly lift it.
Copyright © Huawei Technologies Co., Ltd.
LUNA2000-100KTL and 200KTL Series Smart
Reference.
8 Device Maintenance
63